IEC 60662-2011 PDF

IEC 60662-2011 PDF

High-pressure sodium vapour lamps-Performance specifications

$15.77 $31.53 -50%
Product Code: IEC 60662
Stock In Stock
Edition: 2.0
Published: 02/2011
Number of Pages: 374
File Size: 1 file, 2 Bytes

Available Options

Product Description

HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS

Introduction: The relation between data sheet numbers of the first and the second edition is given below. Lamp data sheets 1st edition 2nd edition 1st edition 2nd edition 1st edition 2nd edition 1010 3250 1090 1105 2120 3300 1010 3255 1100 9000 2120 3305 1010 3260 1110 0770 2130 3310 1020 3265 1120 0775 2130 3315 1020 3270 1130 0780 2140 4500 1030 4400 1140 0785 2140 4505 1030 4405 1150 9005 2150 4510 1030 4410 1160 9010 2150 4515 1040 4415 1170 0550 3010 2300 1040 4420 1180 0555 3020 3400 1050 2150 1190 0560 3030 4600 1050 2155 6000 4010 3500 1060 2160 2100 2200 4020 3505 1060 2165 2110 2210 4030 4700 1070 1119 2110 2215 4040 4705 1080 1100 Lamp outline sheets 1st edition 2nd edition 1st edition 2nd edition 150 01 9030 mod. 400 01 9010 250 01 9031 400 02 9011 250 02 9032 400 03 9012 mod. 250 03 9040 mod. 400 04 9020 250 04

Scope: This International Standard specifies performance requirements for high-pressure sodium vapour lamps for general lighting purposes which comply with the safety requirements of IEC 62035. For some of the requirements given in this standard, reference is made to “the relevant lamp data sheet”. For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this standard relate only to type testing. The requirements dealing with the lamp starting test and associated information for ballast/ignitor design are different depending on the practice of the country in which the lamp type was originally developed. NOTE The requirements and tolerances permitted by this standard correspond to testing of a type test sample submitted by the manufacturer for that purpose. In principle, this type test sample should consist of units having characteristics typical of the manufacturer’s production and being as close to the production centre point values as possible. It may be expected with the tolerances given in the standard that product manufactured in accordance with the type test sample will comply with the standard for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see IEC 60410.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Information for luminaire design
  • 11 Maximum lamp outlines
  • 12 Numbering system for lamp data sheets

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60662-2011 PDF

IEC 60662-2011 PDF

$15.77 $31.53