Industrial electroheating equipment – Test methods for direct arc furnaces
Introduction: Direct electrical arc furnaces are very important applications for steel scrap melting, melting of direct reduced iron (DRI), hot bricked iron (HBI) or hot metal. While ladle furnaces are mainly used for providing the required quality and final adjustment of temperature of molten steel before sending to casting machine or to vacuum treatment stations. The manufacturer of the installation or equipment usually fulfils the following requirements, which come from different sources and are quite often in this order of priorities: a) to enable the intended process and make the installation work properly; b) to be cost effective during design and manufacturing; c) to ensure that the equipment is safe to use in the sense of providing freedom from unacceptable risk of physical injury or damage to the health of the operator (safety in the narrower sense of ISO 12100:2010); d) to ensure that the equipment is safe to use in the sense of providing freedom from unacceptable risk or physical injury or damage to the health of people, or damage to property or the environment (adding other safety aims to item c), and in the much broader definition of safety according to ISO/IEC Guide 51); e) to prove that the equipment is cost effective to operate and uses sufficiently small amounts of energy, material and other resources. It is usually part of the proprietary knowledge of the manufacturer or user of the equipment, to make it cost effective or enable intended processes with a benefit. IEC 6051
Scope: This clause of IEC 60398:2015 is replaced by the following. Replacement: This document specifies the basic test procedures, conditions and methods for establishing the main performance parameters and the main operational characteristics of furnaces for direct arc heating, forming arcs between the electrode and metal, such as electric arc furnaces using alternating current (EAF AC) or direct current (EAF DC), and ladle furnaces (LF), with rated power level above 500 kVA . Measurements and tests that are solely used for the verification of safety requirements of equipment for direct electrical arc furnaces are outside the scope of this document and are covered by IEC 60519-1, IEC 60519-4 and ISO 13578. This document is applicable for the commissioning, verification of design improvements or for energy related tasks with respect to energy use or energy efficiency, establishing of an energy baseline, and labelling. Some concepts from this document can directly be used as key performance indicators. Detailed tests for specific types of electric arc furnace equipment and installations are beyond the scope of this document. This document is intended as general reference for all future test standards applicable to particular electric arc furnace equipment or installations. This document includes the concept and material presented in IEC 60398 on energy efficiency dealing with the electrical and processing parts of the equipment, as well as the overall performance. Test methods for some special equipment, e.g., semiconductor converters, are covered by IEC 60146-1-1 and furnace transformers are covered by IEC 60076 series. Test methods for submerged arc furnaces (SAF) are covered by IEC 60683.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 8.101 General
- 8.102 Electrical insulation
- 8.103 Cold function test
- 8.104 Hot commissioning
- 8.105 Preparation for performance test