Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving - General Purpose
Introduction: This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1) Part 2: Methods of test (IEC 60684-2) Part 3: Specification for individual types of sleeving (IEC 60684-3) This standard gives one of the sheets comprising part 3 as follows: Sheet 136: Extruded fluorosilicone sleeving – General purpose.
Scope: This sheet of IEC 60684-3 gives the requirements for non-heat-shrinkable sleeving, extruded from compounds based on fluorosilicone rubber. Sleeving of this type is normally available with internal diameters up to 25 mm, and in a range of different wall thicknesses between 0,1 mm and 2,0 mm. National standards may select a restricted list of preferred combinations of internal diameter and wall thickness. These sleevings are normally available in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white, pink and green/yellow. They are also available in colourless translucent/transparent form.