Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 145 to 147: Extruded PTFE Sleeving
Introduction: This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); Part 2: Methods of test (IEC 60684-2); Part 3: Specification requirements for individual types of sleeving (IEC 60684-3). This standard contains three of the sheets comprising part 3 as follows: Sheet 145: Extruded PTFE sleeving – Thin wall Sheet 146: Extruded PTFE sleeving – Standard wall Sheet 147: Extruded PTFE sleeving – Thick wall
Scope: These sheets of IEC 60684-3 give the requirements for three types of non-heat-shrinkable sleeving, extruded from PTFE. Sleeving of this type is normally available with internal diameters up to 8,53 mm and in a range of wall thicknesses between 0,15 mm and 0,51 mm. This specification covers three levels of wall thickness: “thin wall”, “standard wall” and “thick wall” related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Experience of product performance indicates that PTFE sleeving may be suitable for inclusion in systems for operation at temperatures up to 250 °C. These sleevings are normally available in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white, pink and turquoise. It is also available as non- coloured. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the other property requirements listed in tables 1 and 2.