IEC 60684-3-400 TO 402-2002 PDF

IEC 60684-3-400 TO 402-2002 PDF

Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating

$25.22 $50.44 -50%
Product Code: IEC 60684-3-400 TO 402
Stock In Stock
Edition: 2.0
Published: 06/2002
Number of Pages: 26
File Size: 1 file, 485 Bytes

Available Options

Product Description

Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating

Introduction: This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); Part 2: Methods of test (IEC 60684-2); Part 3: Specifications for individual types of sleeving (IEC 60684-3). This standard consists of three of the sheets comprising Part 3, as follows: Sheet 400: Glass textile sleeving with silicone elastomer coating: high breakdown voltage Sheet 401: Glass textile sleeving with silicone elastomer coating: medium breakdown voltage Sheet 402: Glass textile sleeving with silicone elastomer coating: low breakdown voltage

Scope: This International Standard gives the requirements for three types of E-type glass sleeving using either braided or knitted construction, with a continuous silicone elastomer coating and differentiated by their breakdown voltage (sheet 400: high breakdown voltage; sheet 401: medium breakdown voltage; sheet 402: low breakdown voltage). These sleevings have been found suitable for temperatures up to 180 °C. These sleevings are normally available in internal diameters between 0,3 mm and 25 mm. The sleeving is normally supplied in the following colours: black, grey, white, red, yellow, blue, brown, green, green/yellow and natural. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in tables 2 and 5. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60684-3-400 TO 402-2002 PDF

IEC 60684-3-400 TO 402-2002 PDF

$25.22 $50.44