Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products – General guidelines
Introduction: In the design of any electrotechnical product, the risk of fire and the potential hazards associated with fire need to be considered. In this respect the objective of component, circuit and product equipment design, as well as the choice of materials, is to reduce to acceptable levels the potential risks of fire to a tolerable level even in the event of reasonably foreseeable abnormal (mis)use, malfunction or failure. This standard, together with its companions, IEC 60695-1-11 and IEC 60695-1-12, provides guidance on how this is to be accomplished. The use of compartments with fire-resistant boundaries, and the use of detection and suppression systems are important methods for the mitigation of fire risk, but are not dealt with in this standard. Fires involving electrotechnical products can be initiated from external non-electrical sources. Considerations of this nature are dealt with in an overall fire hazard assessment. The aim of the IEC 60695 series of standards is to save lives and property by reducing the number of fires or reducing the consequences of the fire. This can be accomplished by: the primary aims are trying to prevent ignition caused by an electrically energised component part and, in the event of ignition, to confine any resulting fire within the bounds of the enclosure of the electrotechnical product; secondary aims include trying to minimise any flame spread beyond the product’s enclosure and to minimise the harmful effects of fire effluents including heat
Scope: This part of IEC 60695-1 provides general guidance with respect to fire hazard testing on how to reduce to acceptable a tolerable levels the risk of fire and the potential effects of fires involving electrotechnical products. It also serves as a signpost standard to the other guidance publications in the IEC 60695 series. It does not give guidance on the use of fire-resistant compartment boundaries or on the use of detection and suppression systems for the mitigation of fire risk. It describes the relationship between fire risk and the potential effects of fire, and provides guidance to IEC product committees on the applicability of qualitative and quantitative fire tests to the fire hazard assessment of electrotechnical products. Details of the calculation of fire risk are not included in the scope of this document. It emphasises the importance of the scenario approach to fire hazard and risk assessment and discusses criteria intended to ensure the development of technically sound hazard-based fire test methods. It discusses the different types of fire tests, in particular the nature of qualitative and quantitative fire tests. It also describes the circumstances under which it is appropriate for IEC product committees to maintain or develop qualitative fire tests. This standard is intended as guidance to IEC committees, and should is to be used with respect to their individual applications. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
Contents:
- FOREWORD
- INTRODUCTION
- Scope