IEC 60695-1-12-2015 PDF

IEC 60695-1-12-2015 PDF

Fire hazard testing-Part 1-12: Guidance for assessing the fire hazard of electrotechnical products-Fire safety engineering

$163.93 $327.86 -50%
Product Code: IEC 60695-1-12
Stock In Stock
Edition: 1.0
Published: 01/2015
Number of Pages: 70
File Size: 1 file, 683 Bytes

Available Options

Product Description

Fire hazard testing – Part 1-12: Guidance for assessing the fire hazard of electrotechnical products – Fire safety engineering

Introduction: Fire safety engineering Fire safety engineering concerns the application of engineering methods based on scientific principles to the development or assessment of designs in the built environment through the analysis of specific fire scenarios or through the quantification of risk for a group of fire scenarios. This is in order to achieve fire safety engineering objectives, which typically are: a) to protect life safety, b) to protect property, c) to maintain the continuity of operations, d) to protect the natural environment, and e) to preserve heritage. The analysis is based on calculations that use input data obtained principally from quantitative fire tests. Fire safety engineering (FSE) is a discipline increasingly being used in support of performance-based national fire safety regulations in many countries and regional jurisdictions throughout the world. The eight parts of ISO/TR 13387 (see Clause 2 and [1] to [6]) and ISO 23932 outline the fundamental methodologies and uses of FSE. Further detailed aspects of FSE are covered in ISO 16730 [7], ISO/TS 16732 [8], ISO/TS 16733, ISO 16734 [9], ISO 16735 [10], ISO 16736 [11], ISO 16737 [12] and ISO/TR 16738. In addition to purely performance-based regulations, many countries are also using FSE to supplement prescriptive regulations by applying FSE principles to specific design aspects, where reduced costs, alternative practices, improved performance and improved safety are the objectives. The International Maritime Organizat

Scope: This part of IEC 60695 is intended as a general guideline for IEC Product Committees and provides: an explanation of the principles and uses of fire safety engineering; guidance on the use of fire safety engineering in the design of electrotechnical products; fire safety engineering terminology, and concepts; an indication of properties, data and tests needed for input into fire safety engineering assessments; informative references. This international standard is not intended to be a detailed technical design guide, but is intended to provide guidance for product committees on fire safety engineering methods and performance based test information needs for use in performance based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in the ISO/TR 13387 series of documents (see Clause 2 and [1] to [6]) and in ISO 23932. NOTE Further detailed aspects of FSE are covered in ISO 16730 [7], ISO/TS 16732 [8], ISO/TS 16733, ISO 16734 [9], ISO 16735 [10], ISO 16736 [11], ISO 16737 [12] and ISO/TR 16738. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • Introduction

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60695-1-12-2015 PDF

IEC 60695-1-12-2015 PDF

$163.93 $327.86