IEC 60695-1-14-2026 PDF

IEC 60695-1-14-2026 PDF

Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

$50.44 $100.88 -50%
Product Code: IEC 60695-1-14
Stock In Stock
Edition: 1.0
Published: 10/2026
Number of Pages: 18
File Size: 1 file

Available Options

Product Description

Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

Introduction: In the design of any electrotechnical product the risk of fire and the potential hazards associated with fire need to be considered. In this respect the objective of component, circuit and equipment design, as well as the choice of materials, is to reduce the risk of fire to a tolerable level even in the event of reasonably foreseeable (mis)use, malfunction or failure. IEC 60695-1-10 [1], IEC 60695-1-11 [2] and IEC 60695-1-12 [3] provide guidance on how this is to be accomplished. Fires involving electrotechnical products can be initiated from external non-electrical sources. Considerations of this nature are dealt with in an overall fire hazard assessment. The aim of the IEC 60695 (all parts) [4] series of standards is to save lives and property by reducing the number of fires or reducing the consequences of the fire. This can be accomplished by trying to: prevent ignition caused by an electrically energised component part and, in the event of ignition, to confine any resulting fire within the bounds of the enclosure of the electrotechnical product; minimize flame spread beyond the product’s enclosure and to minimize the harmful effects of fire effluents including heat, smoke, and toxic or corrosive combustion products. This document provides guidance to Product Committees on the power levels and amounts of energy that are likely to cause ignition and fire. It also provides guidance to Product Committees on the fire hazard safeguards that might be necessary to protect agains

Scope: This part of IEC 60695 provides guidance about the levels of power and energy that could cause ignition and fire in a low voltage electrotechnical product. It can be used by Product Committees to determine what fire hazard safeguards can be used, based on the electrical energy that could be dissipated as heat. This document deals with products used in normal atmospheres commonly available in the home and does not deal with special locations such as those in explosive atmospheres. It is intended as guidance to IEC committees, and is intended be used with respect to their individual applications. This basic safety publication, focusing on safety guidance, is primarily intended for use by TCs in the preparation of safety publications in accordance with the principles laid down in IEC GUIDE 104 [5] and ISO/IEC Guide 51 [6]. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60695-1-14-2026 PDF

IEC 60695-1-14-2026 PDF

$50.44 $100.88