Fire hazard testing – Part 1-40: Guidance for assessing the fire hazard of electrotechnical products – Insulating liquids
Introduction: In the design of any electrotechnical product the risk of fire and the potential hazards associated with fire need to be considered. In this respect the objective of component, circuit and product design as well as the choice of materials is to reduce to acceptable levels the potential risks of fire even in the event of foreseeable abnormal use, malfunction or failure. For more than 100 years, insulating liquids based on mineral oil have been used for the insulating and cooling of electrical transformers and some other types of electrotechnical equipment. During the last 70 years, synthetic insulating liquids have been developed and used in specific electrotechnical applications for which their properties are particularly suitable. However, for technical and economic reasons, highly refined mineral oil continues to be the most widely used insulating liquid for use in transformers, the major end use application. Their safe installation is covered by local, national and international regulations. The fire safety record of electrotechnical equipment containing insulating liquids is good, for both mineral oil and synthetic liquids. In recent years improvements in design and protective measures against fire have reduced the fire hazard for electrotechnical equipment containing mineral oil. However, as for all forms of electrotechnical equipment, the objective should be to reduce the likelihood of fire even in the event of foreseeable abnormal use. The practical aim is to prevent i
Scope: This international standard provides guidance on the minimization of fire hazard arising from the use of electrical insulating liquids, with respect to: a) electrotechnical equipment and systems, b) people, building structures and their contents. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 [1] 1 and ISO/IEC Guide 51 [2]. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.
Contents:
- FOREWORD
- INTRODUCTION
- Scope