Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 1: General requirements
Introduction: Although the noise emitted by household appliances does not generally present a hazard to the hearing of the operator and other exposed persons, the need for standardization procedures for the determination of the noise emitted has been recognized for a long time. Such procedures should be specified, not only for special types of appliances, but also the principles should be applicable to the majority of appliances in general use. Generally, the determination of noise levels is only part of a comprehensive testing procedure covering many aspects of the properties and performances of the appliance. It is therefore important that the requirements for noise measurements (such as test environment, instrumentation, and amount of labour involved) should be kept at a modest level. The results of noise measurements will be are used for many purposes, for example for noise declaration, as well as for comparing the noise emitted by a specific appliance to the noise emitted by other appliances of the same family. In other cases, the results will be are taken as a basis for engineering action in the development stages of new pieces of equipment, or in deciding on means for sound insulation. For all purposes, it is important to specify procedures with known accuracy so that the results of measurements taken by different laboratories can be compared. These conditions have, as far as possible, been taken into account in the preparation of this test code. The acoustic measuring methods are b
Scope: 1.1.1 General This part of IEC 60704 applies to electric appliances (including their accessories or components) for household and similar use, supplied from mains or from batteries. By "similar use" is understood the use in conditions similar to those found in households, for example in inns, coffee houses, tea rooms, hotels, barber or hairdresser shops, launderettes, etc., if not otherwise specified in the IEC 60704-2 series. This document does not apply to appliances, equipment, or machines designed exclusively for industrial or professional purposes; appliances that are integrated parts of a building or its installations, such as equipment for air conditioning, heating and ventilating (except household fans, cooker hoods, free- standing heating appliances, dehumidifiers, air cleaners, and stand-alone water heaters), oil burners for central heating, pumps for water supply and for sewage systems; separate motors or generators and appliances exclusively for outdoor use. For determining and verifying noise emission values declared in product specifications, see IEC 60704-3:2019. 1.1.2 Types of noise A classification of different types of noise is given in ISO 12001. The method specified in ISO 3744 is suitable for measurements of all types of noise emitted by household appliances. The methods specified in ISO 3743-1 and ISO 3743-2 are suitable for all types of noise, except for sources of impulsive noise consisting of short duration noise bursts. This will be taken into account in the preparation of parts 2. 1.1.3 Size of the source The method specified in ISO 3744 is applicable to noise sources of any size. Limitations for the size of the source are given in 1.3 of ISO 3743-1 and ISO 3743-2. This will be taken into account in the preparation of parts 2. 1.2 Object This standard is concerned with objective methods of engineering accuracy (grade 2 according to ISO 12001) for determining sound power levels LW, expressed in decibels (dB) with reference to a sound power of one picowatt (1 pW), of airborne acoustical noise within the specified frequency range of interest (generally including the octave bands with centre frequencies from 125 Hz to 8 000 Hz), and for pr
Contents:
- FOREWORD
- INTRODUCTION
- Scope