Cable networks for television signals, sound signals and interactive services – Part 6: Optical equipment
Introduction: Standards of the IEC 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. This covers all kinds of networks that convey modulated RF carriers such as CATV- networks; MATV-networks and SMATV-networks; individual receiving networks; and all kinds of equipment, systems and installations installed in such networks. NOTE CATV encompasses the Hybrid Fibre Coaxial (HFC) networks used nowadays to provide telecommunications services, voice, data and audio and video both broadcast and narrowcast. The extent of this standardisation work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input. The standardisation of any user terminals (i.e. tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. The reception of television signals inside a building requires an outdoor antenna and a distribution network to convey the signal to the TV receivers.
Scope: This part of IEC 60728 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services. This standard applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; covers the frequency range 5 MHz to 3 000 MHz; NOTE The upper limit of 3 000 MHz is an example, but not a strict value. identifies guaranteed performance requirements for certain parameters; lays down data publication requirements with guaranteed performance; describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 4.10 Slope and flatness
- 4.10.1 Purpose
- 4.10.2 Equipment required
- 4.10.3 Procedure
- 4.10.4 Potential sources of error