IEC 60728-7-3-2009 PDF

IEC 60728-7-3-2009 PDF

Cable networks for television signals, sound signals and interactive services-Part 7-3: Hybrid fibre coax outside plant status monitoring-Power supply to transponder interface bus (PSTIB)

$163.93 $327.86 -50%
Product Code: IEC 60728-7-3
Stock In Stock
Edition: 2.0
Published: 10/2009
Number of Pages: 42
File Size: 1 file

Available Options

Product Description

Cable networks for television signals, sound signals and interactive services – Part 7-3: Hybrid fibre coax outside plant status monitoring – Power supply to transponder interface bus (PSTIB)

Introduction: Standards of the IEC 60728 series deal with cable networks including equipment and associ- ated methods of measurement for headend reception, processing and distribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission me- dia. This includes CATV1-networks; MATV-networks and SMATV-networks; individual receiving networks; and all kinds of equipment, systems and installations installed in such networks. The extent of this standardization work is from the antennas and/or special signal source in- puts to the head-end or other interface points to the network up to the terminal input. The standardization of any user terminals (i.e. tuners, receivers, decoders, multimedia termi- nals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. The following differences exist in some countries: The Japanese de facto standard (NCTEA S-006) concerning requirements for the HFC out- side plant management, which was published in 1995, has already been available in Japan. The purpose of this standard is to support the design and implementation of interoperable management systems for HFC cable networks used in Japan. ___________ This word encompasses the HFC networks used nowadays to provide telecommunications services, voice, data, audio and video both broadcast and narrowcast.

Scope: This part of IEC 60728 specifies requirements for the Hybrid Fibre Coax (HFC) Outside Plant (OSP) Power Supplies (PS). This standard is part of a series developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. The purpose of the standards is to support the design and implementation of interoperable management systems for evolving HFC cable networks. The Power Supply to Transponder In- terface Bus (PSTIB) specification describes the physical (PHY) interface and related messag- ing and protocols implemented at the Data Link Layer (DLL), layers 1 and 2 respectively in the 7-layer ISO-OSI reference model, that support communications between compliant trans- ponders and the managed OSP power supplies and other related power equipment to which they interface. This standard describes the PSTIB PHY and DLL layer requirements and protocols that shall be implemented to support reliable communications between all type 2 and type 3 compliant OSP transponders on the HFC plant and managed OSP power supplies and related hardware. Any exceptions to compliance with this standard will be specifically noted as necessary. Transponder type classifications referenced within the HMS series of standards are defined in Table 1. Table 1 – Transponder type classifications Type Description Application Type 0 Refers to legacy transponder equip- ment which is incapable of supporting the specifications This transponder interfaces with legacy network equipment through proprietary means. This transponder could be managed through the same management applications as the other types through proxies or other means at the head-end. Type 1 Refers to stand-alone transponder equipment (legacy or new), which can be upgraded to support the specifica- tions This transponder interfaces with legacy network equipment through proprietary means. Type 1 is a standards-compliant transponder (either manufactured to the standard or upgraded) that con- nects to legacy network equipment via a proprietary interface. Type 2 Refers to a stand-alone, compliant transponder This transponder interfaces with network equipment designed to support the electrical a

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 6.1.10 Method of communications
  • 6.1.11 Indicators
  • 7.2.10 Method of communication
  • 7.2.11 Indicators

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60728-7-3-2009 PDF

IEC 60728-7-3-2009 PDF

$163.93 $327.86