Automatic electrical controls - Part 2-12: Particular requirements for electrically operated door locks
Scope: This clause of Part 1 is replaced by the following: This document applies to automatic electrically operated door locks for use in, on, or in association with equipment for household appliance and similar use, including equipment for heating, air-conditioning and similar applications; NOTE 1 Throughout this document, the word "equipment" means "appliance and equipment" and "controls" means "door locks". NOTE 2 Throughout this document, the word "door" means "door, cover or lid". The words "door lock" means "electrically operated door lock". for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications; EXAMPLE 1 Controls for commercial catering, heating and air-conditioning equipment. that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof; utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs; using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J; that have electrical circuits and control circuits which are, for example, operated by bimetals, magnet coils, memory metals, pressure elements, temperature-sensitive expansion elements or electronic elements. NOTE 3 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1. This document applies to the inherent safety of electrically operated door locks, and functional safety of electrically operated door locks and safety related systems, electrically operated door locks where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls u
Contents: