IEC 60747-5-13-2026 PDF

IEC 60747-5-13-2026 PDF

Semiconductor devices - Part 5-13: Optoelectronic devices - Hydrogen sulphide corrosion test for LED packages

$135.56 $271.11 -50%
Product Code: IEC 60747-5-13
Stock In Stock
Edition: 1.1
Published: 01/2026
Number of Pages: 40
File Size: 1 file, 629 Bytes

Available Options

Product Description

Semiconductor devices - Part 5-13: Optoelectronic devices - Hydrogen sulphide corrosion test for LED packages

Introduction: This part of IEC 60747 provides the accelerated test method to assess effects of the tarnishing of silver and silver alloys used for LED packages due to hydrogen sulphide, because sulphide gas (H2S) tarnishes silver used in LED packages and causes lumen degradation. There are some existing environmental stress test standards, but they intend to test contacts and connections, not LED lumen degradation. IEC 60068-2-43 provides useful information to assess effects to the contact resistance for contacts and connections due to corrosion of silver and silver alloy. Because the criterion performance in IEC 60068-2-43 is contact resistance, it is not applicable to LED packages to determine effects to the luminous/radiant flux maintenance. For LEDs, light output should be measured, but there is no such provision in existing standards. Therefore, this document has been drawn up. This document provides the accelerated test method with mixture gas (H2S & NO2) test which has the following merits: the test method in this document can reproduce the real failure mode; the test method in this document works to reproduce the in-situ linear kinetics; the test method in this document can reduce the testing duration. In all tests, the major criterion of performance will be the change in the luminous/radiant flux and/or electric characteristics (e.g. forward voltage and forward current) caused by sulphide corrosion. This test may not be suitable as a general corrosion test, i.e. it may not predict

Scope: This part of IEC 60747 provides the accelerated test method to assess effects of the tarnishing of silver and silver alloys used for LED packages due to hydrogen sulphide. Particularly, this test method is intended to give information on silver and silver alloy tarnishing effects to the luminous/radiant flux maintenance of LED packages. Additionally, this test method can give information on electric performances of LED packages due to corrosion of silver and silver alloys. The object of this test is to determine the influence of atmospheres containing hydrogen sulphide on parts of LED packages made of: silver or silver alloy; silver or silver alloy protected with another layer; other metals covered with silver or silver alloy. Testing other degradations that are susceptible to affect luminous/radiant flux maintenance and/or electric performance (e.g. degradation of copper or silicone parts) is not the object of this test. This document is applicable to LED packages for lighting applications only if referenced by an IEC SC 34A document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60747-5-13-2026 PDF

IEC 60747-5-13-2026 PDF

$135.56 $271.11