IEC 60793-1-46 CMV-2024 PDF

IEC 60793-1-46 CMV-2024 PDF

Optical fibres-Part 1-46: Measurement methods and test procedures-Monitoring of changes in attenuation (Commented Version)

$100.88 $201.76 -50%
Product Code: IEC 60793-1-46 CMV
Stock In Stock
Edition: 2.0
Published: 06/2024
Number of Pages: 44
File Size: 1 file, 980 KB

Available Options

Product Description

Optical fibres – Part 1-46: Measurement methods and test procedures – Monitoring of changes in attenuation (Commented Version)

Introduction: Publications in the IEC 60793-1 series concern measurement methods and test procedures as they apply to optical fibres. Within the same series several different areas are grouped, as follows: parts 1-10 to 1-19: General IEC 60793-1-20 to IEC 60793-1-29: Measurement methods and test procedures for dimensions IEC 60793-1-30 to IEC 60793-1-39: Measurement methods and test procedures for mechanical characteristics IEC 60793-1-40 to IEC 60793-1-49: Measurement methods and test procedures for transmission and optical characteristics IEC 60793-1-50 to IEC 60793-1-59: Measurement methods and test procedures for environmental characteristics IEC 60793-1-60 to IEC 60793-1-69: Measurement methods and test procedures for polarization-maintaining fibres

Scope: This part of IEC 60793 establishes uniform requirements for the monitoring of changes in optical transmittance attenuation, thereby assisting in the inspection of fibres and cables for commercial purposes. This document gives two methods for monitoring the changes in optical transmittance attenuation of optical fibres and cables that occur during mechanical or environmental testing, or both. It provides a monitor in the change of optical transmission attenuation characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope: method A: change in transmittance attenuation by transmitted power; method B: change in transmittance attenuation by backscattering. Methods A and B apply to the monitoring of all categories of the following fibres: class A: multimode fibres; class B: single-mode fibres; class C: single-mode intraconnection fibres. 2 Information common to both measurements is contained in Clause 1 to Clause 10, and information pertaining to each individual method appears in Annex A, and Annex B respectively.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Specification information

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60793-1-46 CMV-2024 PDF

IEC 60793-1-46 CMV-2024 PDF

$100.88 $201.76