IEC 60800-2026 PDF

IEC 60800-2026 PDF

Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation

$302.64 $605.28 -50%
Product Code: IEC 60800
Stock In Stock
Edition: 4.1
Published: 06/2026
Number of Pages: 62
File Size: 1 file

Available Options

Product Description

Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation

Introduction: This document is intended to provide a comprehensive overview of the essential requirements and testing appropriate to electrical resistance heating cables used for comfort heating and prevention of ice formation. While some of this work already exists in national standards or international standards, this document has collated much of this existing work. This document provides a means to verify the electrical, thermal and mechanical durability of resistive heating cables, so that in normal use their performance is without danger to the user or surroundings. Compliance is checked by carrying out all the tests specified in this document.

Scope: This document is applicable to, and specifies requirements for resistive heating cables for low temperature applications such as comfort heating and the prevention of ice formation. These heating cables and heating cable sets can comprise either factory assembled or field (work- site) assembled units, and are heating cables assembled in accordance with manufacturer’s instructions. Bare conductors and protected conductors to be supplied at voltages equal to, or less than, 50 V are excluded from the scope of this document. Typical applications include, but are not limited to: surface heating installed in or under surfaces; direct and storage heating; snow melting and frost protection of roofs, gutters, pipes, etc. Electrical resistance trace heating systems for industrial and commercial applications are specified in the IEC 62395 series [1]1 and for explosive atmospheres applications in the IEC/IEEE 60079-30 series [2], as are mineral insulated heating cables. Applications in which the sheath temperature exceeds 100 °C are outside the scope of this document. The object of this document is to ensure that electrical resistance heating cables operate safely under their normal defined conditions of use. This is achieved by: employing heating cables of the appropriate construction that meet the test criteria detailed in this document; including, for heating cables with an electrical protective component, a metallic braid, concentric wires or sheath, or other suitable electrically conductive material for protective purposes in case of fault; ensuring that the heating cables operate at safe temperatures with respect to the materials used in the construction of the cables and their installations according to national regulations.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60800-2026 PDF

IEC 60800-2026 PDF

$302.64 $605.28