IEC 60835-3-2-1995 PDF

IEC 60835-3-2-1995 PDF

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna

$211.22 $422.43 -50%
Product Code: IEC 60835-3-2
Stock In Stock
Edition: 1.0
Published: 12/1995
Number of Pages: 108
File Size: 1 file, 4 Bytes

Available Options

Product Description

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna

Scope: This section of IEC 835-3 gives definitions and methods of measurement of the electrical characteristics of satellite earth-station antennas for frequencies above about 1 GHz. The methods are applicable to reflector type antennas for digital and analog signal transmission. The purpose of the measurements is mainly to confirm that earth-station antenna performance complies with the requirements generally given by the satellite system provider based on the Radio Regulations and applicable international standards such as ITU-R Recommendation S.733-1 and the CCIR Recommendations 465-4, 580-3, 731 and 732. The measurement procedures are often prescribed by international satellite service organizations. Measurements are performed under the condition that all antenna subsystem equipment is connected unless otherwise stated.

Contents:

  • FOREWORD
  • 1 Scope
  • 2 Normative references
  • 3 Definitions
  • 4 Conditions of measurement
  • 5 Antenna gain
  • 5.1 General considerations
  • 5.2 Method of measurement
  • 5.3 Presentation of results
  • 5.4 Details to be specified
  • 6 Antenna pattern
  • 6.1 General considerations
  • 6.2 Terrestrial bore-sight pattern measurements
  • 6.3 Measurement of antenna pattern via satellite
  • 6.4 Antenna monopulse pattern
  • 6.5 Measurement accuracy
  • 6.6 Presentation of results
  • 6.7 Details to be specified
  • 7 Polarization
  • 7.1 Calculation of the polarization efficiency
  • 7.2 Cross-polarization discrimination (XPD)
  • 7.3 Two-port discrimination of dual polarized frequency re-use antennas
  • 7.4 Presentation of results
  • 7.5 Details to be specified
  • 8 Receive figure of merit (G/T)
  • 9 Antenna noise temperature
  • 9.1 General considerations
  • 9.2 Method of measurement
  • 9.3 Presentation of results
  • 9.4 Details to be specified

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60835-3-2-1995 PDF

IEC 60835-3-2-1995 PDF

$211.22 $422.43