Plugs and socket-outlets for household and similar purposes - Part 3-2: Particular requirements for accessories incorporating electronic components to perform additional functions
Introduction: Standard plugs and socket-outlets are now available with various additional features such as Wi-Fi extenders, remote switching, energy saving, etc. For the purposes of this document, these features are called additional functions. This part of the IEC 60884 series provides particular requirements for plugs and socket-outlets which incorporate electronic components for the purpose of providing additional functions. The additional functions are categorised into 3 groups: additional functions that control the output of the accessory (these products are often called “smart sockets”, “smart socket-outlets” or “smart plugs”); additional functions being powered by the accessory which do not control the output; additional functions that have protective means (e.g. overvoltage protection) other than Residual Current Devices. The requirements that are common to all three categories are given in the main part of this document. Specific requirements are given in Annex AA to Annex CC. This part does not address additional functions that have already been covered by other parts of the IEC 60884 series, for example, socket-outlets incorporating USB power supply which are covered by IEC 60884-3-1. It is recognised that provision of a dimming function in fixed and portable socket-outlets poses a considerable safety risk to the loads that can be connected to a socket-outlet. Therefore, provision should not be made for dimming function in fixed and portable socket-outlets.
Scope: IEC 60884-1:2022, Clause 1 is applicable except as follows: Replace the first paragraph by the following: This part of IEC 60884 applies to plugs and fixed or portable socket-outlets for AC only, incorporating electronic components to perform additional functions, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, for use either indoors or outdoors. This document covers safety and Electromagnetic Compatibility (EMC) requirements for plugs and socket-outlets incorporating electronic components to perform additional functions. Addition after the third paragraph: The rated current is limited to 16 A maximum for accessories incorporating electronic components which control the output. Replace the fourth paragraph by the following: This document covers only those requirements for mounting boxes which are necessary for the tests on the socket-outlet incorporating electronic components to perform additional functions. Replace the dash text after NOTE 2 by the following dashes: accessories incorporating USB power supply which are covered by IEC 60884-3-1; mechanically switched socket-outlets without any electronic function which are covered by IEC 60884-2-3; accessories including RCD’s which are covered by IEC 62640 and IEC 61540; portable socket-outlets incorporating electronic switches validated according to IEC 61058-1-2; switched socket-outlets with interlock for fixed electrical installations, which are covered by IEC 60884-2-6. Replace the eighth paragraph by the following: This document applies to plugs and socket-outlets incorporating electronic components for use at ambient temperature not normally exceeding +25 °C but occasionally reaching +35 °C with a lower limit of the ambient air temperature of −5 °C. Add the following paragraph after the eighth paragraph: Functional safety aspects are not covered by this document. Add the following paragraphs after the last paragraph: This document gives additional tests and requirements for accessories incorporating electronic components for additional functions that control the output of the
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 101 Abnormal conditions
- 102 Components