Single-Capped Fluorescent Lamps - Performance Requirements
Scope: This International Standard specifies the performance requirements for single-capped fluorescent lamps for general lighting service. The requirements of this standard relate only to type testing. Conditions of compliance, including methods of statistical assessment, are under consideration. The following lamp types and modes of operation with external ballasts are included: a) lamps operated with an internal means of starting, having preheated cathodes, for oper- ation on a.c. mains frequencies; b) lamps operated with an external means of starting, having preheated cathodes, for operation on a.c. mains frequencies with the use of a starter, and additionally operating on high frequency; c) lamps operated with an external means of starting, having preheated cathodes, for oper- ation on a.c. mains frequencies without the use of a starter (starterless), and additionally operating on high frequency; d) lamps operated with an external means of starting, having preheated cathodes, for oper- ation on high frequency; e) lamps operated with an external means of starting, having non-preheated cathodes, for operation on high frequency. 1.2 General statement It may be expected that lamps which comply with this standard will start and operate satisfactorily at voltages between 92 % and 106 % of rated supply voltage and at an ambient air temperature of between 10 °C and 50 °C, when operated with a ballast complying with IEC 60921 or IEC 60929, where relevant with a starter complying with IEC 60155 or IEC 60927, and in a luminaire complying with IEC 60598-1. NOTE For some lamps, additional information for high-frequency ballast design is given for proper starting at an ambient air temperature of –15 °C. 1.3
Contents: