IEC 60958-4-1-2016 PDF

IEC 60958-4-1-2016 PDF

Digital audio interface - Part 4-1: Professional applications - Audio content

$25.22 $50.44 -50%
Product Code: IEC 60958-4-1
Stock In Stock
Edition: 1.0
Published: 03/2016
Number of Pages: 24
File Size: 1 file, 297 Bytes

Available Options

Product Description

Digital audio interface - Part 4-1: Professional applications - Audio content

Introduction: The two-channel digital audio interface has been widely used in a variety of professional audio applications that have reached beyond the vision of the original standard. In particular, applications using increased sampling frequencies and alternative physical media. Separating the standard into independently-maintainable parts allows, for example, additional transmission media to be introduced in the future by revising IEC 60958-4-4 without affecting the other parts of the IEC 60958-4 series. The parts comprise: Part 4-1: Audio content: defines the format for coding audio used for the audio content. It specifies the semantics of the audio data, including the validity flag. It also specifies the sampling frequency by reference to AES5. Part 4-2: Metadata and subcode: specifies the format for information, metadata, or subcode transmitted with the audio data: principally the channel status but also user data and the auxiliary bits. Implementors will note that the current implementation options ("Standard" and "Enhanced") both require that status data be implemented correctly in compliant equipment. Part 4-4: Physical and electrical parameters: specifies the physical signals that convey the bit stream specified in IEC 60958-1. The transport format is intended for use with shielded twisted-pair cable of conventional design over distances of up to 100 m at frame rates of up to 50 kHz. Longer cable lengths and higher frame rates may be used, but with a rapidly increasing requiremen

Scope: This part of IEC 60958 specifies the format for coding audio used for the audio content. Together with IEC 60958-1, IEC 60958-4-2, and IEC 60958-4-4, it specifies an interface for serial digital transmission of two channels of periodically sampled and linearly represented digital audio data from one transmitter to one receiver. It is expected that the audio data will have been sampled at any of the sampling frequencies recognized by AES5. The capability of the interface to indicate other sample rates does not imply that it is recommended that equipment support these rates. To eliminate doubt, equipment specifications should define supported sampling frequencies.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60958-4-1-2016 PDF

IEC 60958-4-1-2016 PDF

$25.22 $50.44