IEC 60958-4-2008 PDF

IEC 60958-4-2008 PDF

Digital audio interface-Part 4: Professional applications

$179.70 $359.39 -50%
Product Code: IEC 60958-4
Stock In Stock
Edition: 2.1
Published: 07/2008
Number of Pages: 26
File Size: 1 file, 484 Bytes

Available Options

Product Description

Digital audio interface – Part 4: Professional applications

Introduction: The interface specified in this standard is primarily intended to carry monophonic or stereophonic programmes at a 48 kHz sampling frequency and with a resolution of up to 24 bits per sample. It may alternatively be used to carry signals sampled at other rates such as 32 kHz, 44,1 kHz, or 96 kHz. Note that conformity to this interface specification does not require equipment to utilize these rates and also that the capability of the interface to indicate other sample rates does not imply that it is recommended that equipment supports these rates. To eliminate doubt, equipment specifications should define the supported sampling frequencies. The format is intended for use with shielded twisted-pair cables over distances of up to 100 m without transmission equalization or any special equalization at the receiver and at frame rates of up to 50 kHz. Longer cable lengths and higher frame rates may be used with cables better matched for data transmission, or with receiver equalization, or both. In both cases, the clock references and auxiliary information are transmitted along with the audio data. Provision is also made to allow the interface to carry non-audio data.

Scope: This International Standard specifies the professional application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1.

Contents:

  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60958-4-2008 PDF

IEC 60958-4-2008 PDF

$179.70 $359.39