Nuclear power plants – Instrumentation and control important to safety – Hardware requirements
Introduction: a) Technical background, main issues and organization of the standard This International Standard provides requirements on the hardware aspects of E/E/PE items used in instrumentation and control (I&C) systems performing safety functions as defined by IEC 61226. It is consistent with, and complementary to, IEC 61513. Activities that are mainly system level activities (for example, integration, validation and installation) are not addressed exhaustively by this document: requirements that are not specific to hardware are deferred to IEC 61513. The basic principles for the design of nuclear instrumentation, as specifically applied to the systems important to safety of nuclear power plants, were first interpreted in nuclear standards with reference to hardwired systems in IAEA Safety Guide 50 SG D3 which has been superseded by IAEA Guide SSG-39. IEC 60987 was first issued in 1989 to cover the hardware aspects of digital systems design for systems important to safety. Although many of the requirements within the original issue continue to be relevant, there were significant factors which justified the development of this revised edition of IEC 60987, in particular: the use of different technologies that may include conventional hardwired equipment, programmable digital equipment or by using a combination of both types of equipment; IEC 61226 and IEC 61513 cover I&C systems performing 3 different categories of functions (A, B and C) and 3 classes of systems (class 1, 2 and 3); the
Scope: I&C systems important to safety may be implemented using conventional hardwired equipment, programmable digital equipment or by using a combination of both types of equipment. This document provides requirements and recommendations for the hardware aspects of I&C systems whatever the technology and applies for all safety classes in a graded manner (as defined by IEC 61513). The requirements defined within this document guide, in particular, the selection of pre- existing components, hardware aspects of system detailed design and implementation and equipment manufacturing. This document does not explicitly address how to protect systems against those threats arising from malicious attacks, i.e. cybersecurity, for programmable digital item. IEC 62645 provides requirements for security programmes for programmable digital item for all their development phases and on-site operation. Pre-existing items may include microcontrollers or HPDs and, where firmware or programming files are deeply-embedded, be effectively "transparent" to the user. In such cases, this document can be used to guide the assessment process for such components. An example of where this approach is considered appropriate is in the assessment of modern processors which contain a microcode. Such code is generally an integral part of the "hardware", and it is therefore appropriate for the processor (including the microcode) to be assessed as an integrated hardware component using this document. Software which is not deeply-embedded, as described above, is developed or assessed according to the requirements of the relevant software standard (for example, IEC 60880 for class 1 systems and IEC 62138 for class 2 and 3 systems). In the same manner, HPDs which are not deeply-embedded, as described above, are developed or assessed according to the requirements of the relevant HPD standard (for example, IEC 62566 for class 1 systems and IEC 62566-2 for class 2 and 3 systems).
Contents:
- FOREWORD
- INTRODUCTION
- Scope