IEC 61000-4-34-2025 PDF

IEC 61000-4-34-2025 PDF

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

$324.71 $649.42 -50%
Product Code: IEC 61000-4-34
Stock In Stock
Edition: 1.2
Published: 08/2025
Number of Pages: 74
File Size: 1 file, 1 Byte

Available Options

Product Description

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

Introduction: IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (in so far as they do not fall under the responsibility of the product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts, published either as international standards or as technical specifications or technical reports, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivision (example: 61000-6-1). INTRODUCTION to Amendment 2 This amendment contains the following main changes in comparison with IEC 61000-4- 34:2005 and IEC 61000-4-34:2005/AMD1:2009: Addition of a note in Annex C: The sign of phase angles of three-phase systems can differ depending on the convention used. It should be noted that phase angles opposite to those used in the figures and tables in this annex (i.e. -120° for L2 instead of +120°) are also common. It is not intended to specify the direction of rotation of the three-phase s

Scope: This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and electronic equipment having a rated input mains current exceeding 16 A per phase. (See Annex E for guidance on electrical and electronic equipment rated at more than 200 A per phase.) It covers equipment installed in residential areas as well as industrial machinery, specifically voltage dips and short interruptions for equipment connected to either 50 Hz or 60 Hz a.c. networks, including 1-phase and 3-phase mains. NOTE 1 Equipment with a rated input mains current of 16 A or less per phase is covered by publication IEC 61000-4-11. NOTE 2 There is no upper limit on rated input mains current in this publication. However, in some countries, the rated input mains current may be limited to some upper value, for example 75 A or 250 A, because of mandatory safety standards. It does not apply to electrical and electronic equipment for connection to 400 Hz a.c. networks. Tests for equipment connected to these networks will be covered by future IEC standards. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to voltage dips, short interruptions and voltage variations. NOTE 1 Voltage fluctuations are covered by publication IEC 61000-4-14. NOTE 2 For equipment under test with rated currents above 250 A, suitable test equipment may be difficult to obtain. In these cases, the applicability of this standard should be carefully evaluated by committees responsible for generic, product and product-family standards. Alternatively, this standard might be used as a framework for an agreement on performance criteria between the manufacturer and the purchaser. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of equipment or a system against a defined phenomenon. As described in IEC Guide 107, this is a basic EMC publication for use by product committees of th

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Test report

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61000-4-34-2025 PDF

IEC 61000-4-34-2025 PDF

$324.71 $649.42