IEC 61048-2015 PDF

IEC 61048-2015 PDF

Auxiliaries for lamps-Capacitors for use in tubular fluorescent and other discharge lamp circuits-General and safety requirements

$302.64 $605.28 -50%
Product Code: IEC 61048
Stock In Stock
Edition: 2.1
Published: 07/2015
Number of Pages: 162
File Size: 1 file, 938 Bytes

Available Options

Product Description

Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements

Introduction: This International Standard covers general and safety requirements for certain capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements for these capacitors are the subject of IEC 61049. NOTE Safety requirements ensure that electrical equipment constructed in accordance with these requirements, does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was intended.

Scope: This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kVAr, and not less than 0,1 µF, having a rated voltage not exceeding 1 000 V, which are intended for use in discharge lamp circuits operating at 50 Hz or 60 Hz and at altitudes up to 3 000 m. NOTE These lamps and associated ballasts are covered by IEC 60081, IEC 60901, IEC 60188, IEC 60192, IEC 60662, and IEC 61167 and by IEC 61347-2-8 and IEC 61347-2-9, respectively. It covers capacitors intended for connection in shunt or in series with the lamp circuit or an effective combination of these. It covers only impregnated or unimpregnated capacitors, having a dielectric of paper, plastic film or a combination of both, either metallized or with metal foil electrodes. This standard does not cover radio-interference suppressor capacitors the requirements for which are found in IEC 60384-14. Tests given in this standard are type tests. Requirements for testing individual capacitors during production are not included. Particular requirements for built-in capacitors having an insulation equivalent to double or reinforced insulation are given in Annex E.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Fuses
  • 11 Discharge resistors
  • 12 Testing sequence
  • 13 Sealing and heating test
  • 13.1 Sealing and heating test for type A capacitors
  • 13.2 Sealing and heating test for type B capacitors
  • 14 High-voltage test
  • 14.1 High-voltage test between terminals
  • 14.2 High-voltage test between terminals and case
  • 15 Resistance to adverse operating conditions
  • 15.1 Humidity test with voltage applied
  • 15.2 Current (discharge) test
  • 16 Resistance to heat, fire and tracking
  • 17 Self-healing test
  • 18 Destruction test
  • 18.1 Test A
  • 18.2 Test B
  • 18.3 Non-self-healing capacitors

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61048-2015 PDF

IEC 61048-2015 PDF

$302.64 $605.28