Industrial-process measurement, control and automation – Evaluation of system properties for the purpose of system assessment – Part 8: Assessment of other system properties
Introduction: IEC 61069 deals with the method which should be used to assess system properties of a basic control system (BCS). IEC 61069 consists of the following parts. Part 1: Terminology and basic concepts Part 2: Assessment methodology Part 3: Assessment of system functionality Part 4: Assessment of system performance Part 5: Assessment of system dependability Part 6: Assessment of system operability Part 7: Assessment of system safety Part 8: Assessment of other system properties Assessment of a system is the judgement, based on evidence, of the suitability of the system for a specific mission or class of missions. To obtain total evidence would require complete evaluation (for example under all influencing factors) of all system properties relevant to the specific mission or class of missions. Since this is rarely practical, the rationale on which an assessment of a system should be based is: the identification of the importance of each of the relevant system properties, the planning for evaluation of the relevant system properties with a cost-effective dedication of effort to the various system properties. In conducting an assessment of a system, it is crucial to bear in mind the need to gain a maximum increase in confidence in the suitability of a system within practical cost and time constraints. An assessment can only be carried out if a mission has been stated (or given), or if any mission can be hypothesized. In the absence of a mission, no assessment can be made; however, eva
Scope: This part of IEC 61069: specifies the detailed method of the assessment of other system properties of a basic control system (BCS) based on the basic concepts of IEC 61069-1 and methodology of IEC 61069-2, defines basic categorization of other system properties, describes the factors that influence other system properties and which need to be taken into account when evaluating other system properties, and provides guidance in selecting techniques from a set of options (with references) for evaluating the other system properties.
Contents:
- FOREWORD
- INTRODUCTION
- Scope