IEC 61180-2-1994 PDF

IEC 61180-2-1994 PDF

High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment

$25.22 $50.44 -50%
Product Code: IEC 61180-2
Stock In Stock
Edition: 1.0
Published: 06/1994
Number of Pages: 24
File Size: 1 file, 858 Bytes

Available Options

Product Description

High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment

Scope: This part of IEC 1180 is applicable to the test equipment used for dielectric tests on low-voltage equipment. It covers tests with direct, alternating or impulse voltage, impulse current, and tests with a combination of impulse voltage and impulse current. Verification procedures necessary for ensuring that the dielectric tests comply with the voltage, or current, requirements stated in part 1 of this standard in shape and magnitude are stated. The test equipment comprises a voltage and/or current generator and a measuring system. This standard covers test equipment in which the measuring system is protected against external interference and coupling by appropriate screening, for example a continu- ous conducting shield. Therefore, simple comparison tests are sufficient to ensure valid results. Test equipment having measuring systems composed of non-screened components and/or connected by long leads is not covered in this standard. In this case guidance can be obtained from IEC 60-2 keeping in mind the less stringent requirements of this standard.

Contents:

  • FOREWORD
  • 1 Scope
  • 2 Normative references
  • 3 Definitions
  • 4 General conditions for verification of test equipment
  • 4.2 Connections and arrangement
  • 4.4 Comparison procedure
  • 5 Verification of characteristics of direct voltage generators
  • 5.2 Permitted measuring error
  • 6 Verification of characteristics of alternating voltage generators
  • 6.2 Permitted measuring error
  • 6.3 Minimum test voltage
  • 7 Verification of characteristics of impulse voltage
  • 7.3 Conventional output impedance
  • 8 Verification of characteristics of impulse current generators
  • 9 Verification of characteristics of hybrid impulse voltage generators
  • 9.2 Virtual impedance
  • 10 Requirements for reference measuring systems
  • 10.5 Comparative measurement

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61180-2-1994 PDF

IEC 61180-2-1994 PDF

$25.22 $50.44