IEC 61188-5-4-2007 PDF

IEC 61188-5-4-2007 PDF

Printed boards and printed board assemblies-Design and use-Part 5-4: Attachment (land/joint) considerations-Components with J leads on two sides

$50.44 $100.88 -50%
Product Code: IEC 61188-5-4
Stock In Stock
Edition: 1.0
Published: 10/2007
Number of Pages: 34
File Size: 1 file, 921 Bytes

Available Options

Product Description

Printed boards and printed board assemblies – Design and use – Part 5-4: Attachment (land/joint) considerations – Components with J leads on two sides

Introduction: This part of IEC 61188 covers land pattern for components with J leads on two sides. The proposed land pattern dimensions in this standard are based upon the fundamental tolerance calculation combined with the given land protrusions and courtyard excesses (see IEC 61188-5-1, Generic requirements). The courtyard includes all issues of the normal manufacturing necessities. The unaltered land pattern dimensions of this part are generally applicable for the solder paste application plus reflow soldering process. For application of the wave soldering process (though uncommon for SOJ components) the land pattern and courtyard dimensions may have to be modified. An orientation parallel to the wave direction is strongly recommended and suitably dimensioned solder thieves should be added. This standard offers a threefold land pattern dimensioning (levels 1, 2, 3) on the basis of a threefold set of land protrusions and courtyard excesses: maximum (max.); medium (mdn); and minimum (min.). Nevertheless the user may develop deviating land pattern dimensions based upon the methodology of IEC 61188-5-1, introducing his own special material and assembling process conditions C, F, P and perhaps his own special land protrusions and courtyard excesses dimensions, as required. If a user has good reasons to use a concept different from that of IEC 61188-5-1 or if the user prefers unusual land protrusions, this standard should be used for checking the resulting solder fillets. It is the responsibi

Scope: This part of IEC 61188 provides the component and land pattern dimensions for small outline integrated circuits with “J“ leads on two sides (SOJ components) used in the reflow soldering process. Basic construction of the SOJ device is also covered. Clause 4 lists the tolerances and target solder joint dimensions used to arrive at the land pattern dimensions.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61188-5-4-2007 PDF

IEC 61188-5-4-2007 PDF

$50.44 $100.88