Printed boards and printed board assemblies – Design and use – Part 5-5: Attachment (land/joint) considerations – Components with gull-wing leads on four sides
Introduction: This part of IEC 61188 covers land patterns for components with gull-wing leads on four sides. Each clause gives information in accordance with the following format. The proposed land pattern dimensions in this standard are based upon the fundamental tolerance calculation combined with the given land protrusions and courtyard excesses (see IEC 61188-5-1, Generic requirements). The courtyard includes all issues of the normal manufacturing necessities. The unaltered land pattern dimensions of this part are generally applicable for the solder paste application plus reflow soldering process. For application of the wave soldering process, the land pattern dimensions normally have to be modified. Orientation parallel to the wave direction is preferable and special, suitably dimensioned solder thieves should be added. This standard offers a threefold land pattern dimensioning (levels 1, 2, and 3) on the basis of a threefold set of land protrusions and courtyard excesses: maximum (max.); median (mdn) and minimum (min.). Each land pattern has been assigned an identification number to indicate the characteristics of the specific robustness of the land patterns. Users also have the opportunity to organize the information so that it is most useful for their particular design. If a user has good reason to use a concept different from that of IEC 61188-5-1, or if the user prefers unusual land protrusions, this standard should be used for checking the resulting solder fillet size. It is the
Scope: This part of IEC 61188 provides information on land pattern geometries used for the surface attachment of electronic components with gull-wing leads on four sides. The intent of the information presented herein is to provide the appropriate size, shape and tolerances of surface mount land patterns to ensure sufficient area for the appropriate solder fillet, and also allow for inspection, testing and reworking of those solder joints. Each clause contains a specific set of criteria such that the information presented is consistent, providing information on the component, the component dimensions, the solder joint design and the land pattern dimensions. The land pattern dimensions are based on a mathematical model that establishes a platform for a solder joint attachment to the printed board. The existing models create a platform that is capable of establishing a reliable solder alloy used to make that joint (lead-free, tin lead, etc.). Process requirements for solder reflow are different based on the solder alloy and should be analyzed in order that the process is above that temperature a sufficient time to form a reliable metallurgical bond.
Contents:
- FOREWORD
- INTRODUCTION
- Scope