IEC 61189-6-2006 PDF

IEC 61189-6-2006 PDF

Test methods for electrical materials, interconnection structures and assemblies-Part 6: Test methods for materials used in manufacturing electronic assemblies

$186.00 $371.99 -50%
Product Code: IEC 61189-6
Stock In Stock
Edition: 1.0
Published: 07/2006
Number of Pages: 88
File Size: 1 file, 1 Byte

Available Options

Product Description

Test methods for electrical materials, interconnection structures and assemblies – Part 6: Test methods for materials used in manufacturing electronic assemblies

Introduction: IEC 61189 relates to test methods for printed boards and printed board assemblies, as well as related materials or component robustness, irrespective of their method of manufacture. The IEC 61189 series is divided into separate parts, covering information for the designer and the test methodology engineer or technician. Each part has a specific focus; methods are grouped according to their application and numbered sequentially as they are developed and released. In some instances test methods developed by other TCs (e.g. TC 104) have been reproduced from existing IEC standards in order to provide the reader with a comprehensive set of test methods. When this situation occurs, it will be noted on the specific test method; if the test method is reproduced with minor revision, those paragraphs that are different are identified. This part of IEC 61189 contains test methods for evaluating materials used in manufacturing electronic assemblies. The methods are self-contained, with sufficient detail and description so as to achieve uniformity and reproducibility in the procedures and test methodologies. The tests shown in this standard are grouped according to the following principles: P: preparation/conditioning methods V: visual test methods D: dimensional test methods C: chemical test methods M: mechanical test methods E: electrical test methods N: environmental test methods X: miscellaneous test methods To facilitate reference to the tests, to retain consistency of presentation,

Scope: This part of IEC 61189 is a catalogue of test methods representing methodologies and procedures that can be applied to materials used in manufacturing electronic assemblies.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 8.10 Test 6C10: Flux induced corrosion (copper mirror method)
  • 10 E: Electrical test methods
  • 11 N: Environmental test methods
  • 12 X: Miscellaneous test methods
  • 12.1 Test 6X01: Determination of solder powder particle size distribution –
  • 12.2 Test 6X02: Solder powder particle size distribution – Measuring microscope
  • 12.3 Test 6X03: Solder powder particle size distribution – Optical image analyser
  • 12.4 Test 6X04: Solder powder particle size distribution – Measuring laser
  • 12.5 Test 6X05: Determination of maximum solder powder particle size
  • 12.6 Test 6X06: Solder paste metal content by weight

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61189-6-2006 PDF

IEC 61189-6-2006 PDF

$186.00 $371.99