Double-Capped Fluorescent Lamps - Safety Specifications
Introduction: The standards IEC 62471 and IEC/TR 62471-2 contain horizontal requirements available that need to be introduced into product standards, e.g. to IEC 61195. The horizontal requirements are transformed into requirements for double-capped fluorescent lamps. The lamps within the scope of this standard are general lighting service (GLS) lamps according to the definition 3.11 of IEC 62471:2006,"...lamps intended for lighting spaces that are typically occupied or viewed by people..." According to Clause 6 of IEC 62471:2006, radiation of GLS lamps is measured at a distance equivalent to 500 lx. Measured at the 500 lx distance, GLS lamps will not exceed risk group 1 for blue light hazard and risk group 0 for IR radiation. This combination of risk group and hazard does not require marking (Table 1 of IEC/TR 62471-2:2009). Hazards from UV radiation of GLS lamps are now covered in 2.13 of IEC 61195. Hence, IEC 62471 does not require any additional marking for GLS lamps.
Scope: This International Standard specifies the safety requirements for double-capped fluorescent lamps for general lighting purposes of all groups having Fa6, Fa8, G5, G13, 2G13, R17d and W4.3×8.5d caps. It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given in this standard. This part of the standard covers photobiological safety according to IEC 62471 and IEC/TR 62471-2. Blue light and infrared hazards are below the level which requires marking. NOTE – Compliance with this standard concerns only safety criteria and does not take into account the performance of double-capped fluorescent lamps for general lighting purposes with respect to luminous flux, colour, starting and operational characteristics. Readers are referred to IEC 60081 for such characteristics. 1.2
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 2.10 Lamp minimum overall length
- 2.11 Information for luminaire design
- 2.12 Information for ballast design
- 2.13 UV radiation