IEC 61226-2020 PDF

IEC 61226-2020 PDF

Nuclear power plants-Instrumentation, control and electrical power systems important to safety-Categorization of functions and classification of systems

$163.93 $327.86 -50%
Product Code: IEC 61226
Stock In Stock
Edition: 4.0
Published: 04/2020
Number of Pages: 84
File Size: 1 file, 1 Byte

Available Options

Product Description

Nuclear power plants – Instrumentation, control and electrical power systems important to safety – Categorization of functions and classification of systems

Introduction: a) Technical background, main issues and organisation of the standard This International Standard responds to an International Atomic Energy Agency (IAEA) requirement1 to identify and classify nuclear power plants important to safety items on the basis of their functions and safety significance. With the application of the concept of Defence in Depth, which is implemented through the combination of a number of consecutive and sufficiently independent levels of protection, the functions important to safety are distributed over several systems or subsystems. In addition, with programmable digital items now being used for NPP instrumentation and control systems, each system or sub-system often performs many functions. Therefore, it is the intent of this standard to establish the criteria and methods to be used to: identify and assign the functions important to safety into categories, depending on their contribution to the prevention and mitigation of postulated initiating events (PIE); classify accordingly the I&C and electrical power systems which are necessary to perform these functions. According to IAEA Safety Standard SSR-2/1 (Requirement 22), the method for classifying the items important to safety shall be based primarily on deterministic methods, complemented where appropriate by probabilistic methods. Several possible approaches for use of probabilistic safety assessment (PSA) for classification are described in IEC TR 61838. b) Situation of the current standard in the

Scope: This document establishes, for nuclear power plants2, a method of assignment of the functions specified for the plant into categories according to their importance to safety. Subsequent classification of the I&C and electrical power systems performing or supporting these functions, based on the assigned category, then determines relevant design criteria. The design criteria, when applied, ensure the achievement of each function in accordance to its importance to safety. In this document, the criteria are those of functionality, reliability, performance, environmental qualification (e.g. seismic) and quality assurance (QA). This document is applicable to: the functions important to safety that are performed by I&C systems and supported by electrical power systems (categorization of I&C functions), the I&C systems that enable those functions to be implemented (classification of I&C systems), the electrical power systems that support those functions (classification of electrical power systems). The systems under consideration provide automated protection, closed or open loop control, information to the operating staff, and electrical power supply to systems. These systems keep the NPP conditions inside the safe operating envelope and provide automatic actions, or enable manual actions, that prevent or mitigate accidents, or that prevent or minimize radioactive releases to the site or wider environment. The I&C and electrical power systems that fulfil these roles safeguard the health and safety of the NPP operators and the public. This document follows the general principles given in IAEA Safety Requirement SSR-2/1 and Safety Guides SSG-30, SSG-34 and SSG-39, and it defines a structured method of applying the guidance contained in those codes and standards to the I&C and electrical power systems that perform functions important to safety in a NPP. This document is read in association with the IAEA guides together with IEC 61513 and IEC 63046 in implementing the requirements of the IEC 61508 series. The overall classification scheme of structures, systems and components for NPPs can be summarized as follows by Figure 1. _____________ 2 The scope of this document is c

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61226-2020 PDF

IEC 61226-2020 PDF

$163.93 $327.86