IEC 61274-1-1-2011 PDF

IEC 61274-1-1-2011 PDF

Fibre optic interconnecting devices and passive components-Adaptors for fibre optic connectors-Part 1-1: Blank detail specification

$50.44 $100.88 -50%
Product Code: IEC 61274-1-1
Stock In Stock
Edition: 3.0
Published: 11/2011
Number of Pages: 24
File Size: 1 file, 317 Bytes

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Adaptors for fibre optic connectors – Part 1-1: Blank detail specification

Scope: This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61274-1, Fibre optic interconnecting devices and passive components- Adaptors for fibre optic connectors-Part 1; Generic specification. It includes: a blank worksheet with instructions for preparing detail specifications. Qualification approval 2.1 Procedure The detail specification shall state the qualification approval procedure to be used either the fixed sample or the lot-by-lot and periodic procedure may be used. 2.2 Test schedule and performance requirements The mandatory test schedules for qualification by the fixed sample procedure are defined in Table 1 of the detail specification worksheet (see Clause 4). The fixed sample procedure consists in subjecting a sample of specimens to the fixed sample qualification test sequence as specified in Table 1. The sample shall be drawn from current production. Quality conformance inspection 3.1 Lot-by-lot and periodic procedure The lot-by-lot and periodic procedure consists in performing the lot-by-lot inspections on a specified number of inspection lots (a minimum of three) taken in as short a time as possible. The periodic tests are then performed on samples selected from at least one of the lots. Samples shall be selected from the lots in accordance with IEC 60410. Normal inspection shall be used, but when the sample size is so small that acceptance based on zero defects is implied, additional specimens shall be taken to meet the sample size requirements for acceptance on one defect. 3.2 Lot-by-lot inspection The mandatory test schedules for lot-by-lot inspection (groups A and B) are defined in Table 2 of the detail specification worksheet (see Clause 4). 3.3 Periodic inspection The mandatory test schedules for periodic inspection (groups C and D) are defined in Table 3 of the detail specification worksheet (see Clause 4). – 14 – 61274-1-1 © CEI:2011 AVANT-PROPOS .................................................................................................................. 15 Domaine d’application ..................................................................................................... 1

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61274-1-1-2011 PDF

IEC 61274-1-1-2011 PDF

$50.44 $100.88