IEC 61280-4-2 (REDLINE + STANDARD)-2024 PDF

IEC 61280-4-2 (REDLINE + STANDARD)-2024 PDF

Fibre- optic communication subsystem test procedures-Part 4-2: Installed cabling plant-Single-mode attenuation and optical return loss measurements

$434.42 $868.83 -50%
Product Code: IEC 61280-4-2 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 05/2024
Number of Pages: 306
File Size: 1 file

Available Options

Product Description

Fibre- optic communication subsystem test procedures – Part 4-2: Installed cabling plant – Single-mode attenuation and optical return loss measurements

Introduction: This second edition of IEC 61280-4-2 for testing single-mode cable plant follows on from the second edition of IEC 61280-4-1, dealing with multimode cable plants. This document is part of a series of IEC standards for measurements of installed fibre optic cabling plants. This document is applicable for the measurement of installed single-mode fibres. Cabling design standards such as ISO/IEC 11801-1 for commercial premises, ISO/IEC 24702 for industrial premises, ISO/IEC 24764 for data centres and ISO/IEC 15018 for residential cabling contain specifications provide general requirements for this type of cabling. These standards support cabling lengths of up to 2 km for commercial premises and data centres and up to 10 km for industrial premises. ISO/IEC 14763-3, which supports these design standards, makes reference to the test methods of this standard ISO/IEC 11801-1, normatively references IEC 61280-4-2. Various recommendations from ITU-T have requirements for longer distance applications, including short haul (40 km), long haul (80 km), and ultra-long haul (160 km). The testing of cable cabling plant for these applications is covered in ITU-T Recommendation G.650.3, which refers to the test methods of this document.

Scope: This part of IEC 61280 is applicable to the measurements of attenuation and optical return loss of an installed optical fibre cable cabling plant using single-mode fibre. This cable cabling plant can include single-mode optical fibres, connectors, adapters, splices, and other passive devices. The cabling may can be installed in a variety of environments including residential, commercial, industrial and data centre premises, as well as outside plant environments. This document may be applied is applicable to all single-mode fibre types including those designated by IEC 60793-2-50 as Class B fibres. The principles of this document may can be applied to cable cabling plants containing branching devices (splitters) and at specific wavelength ranges in situations where passive wavelength selective components are deployed, such as WDM, CWDM and DWDM devices. This document is not intended to apply to cable cabling plants that include active devices such as fibre amplifiers or dynamic channel equalizers.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61280-4-2 (REDLINE + STANDARD)-2024 PDF

IEC 61280-4-2 (REDLINE + STANDARD)-2024 PDF

$434.42 $868.83