IEC 61300-3-1-2005 PDF

IEC 61300-3-1-2005 PDF

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination

$25.22 $50.44 -50%
Product Code: IEC 61300-3-1
Stock In Stock
Edition: 2.0
Published: 09/2005
Number of Pages: 26
File Size: 1 file, 505 Bytes

Available Options

Product Description

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination

Scope: This part of IEC 61300 provides criteria for the visual and mechanical examination of fibre optic piece parts, connectors and passive components. The examination method may be used at any stage of the qualification or quality conformance inspection process, as a stand-alone test, or as required by the relevant specification. Visual examination of the polished end-face is defined in IEC/PAS 61300-3-35 and does not form part of this document. General description This standard describes two examination techniques. a) Method 1: Visual examination of the specimen to ensure that it is of the proper configuration, that the workmanship is satisfactory and that the marking is correct. b) Method 2: Mechanical examination of the specimen to ensure that the dimensions and mass conform to the relevant specification. NOTE Ensure the sample is un-energised, i.e. it is not transmitting optical power, prior to undertaking a visual examination. Apparatus The apparatus shall consist of the following elements. 3.1 Visual examination Where specified in the relevant specification, visual examination shall be undertaken using an optical magnifier and an illuminator. 3.1.1 Optical magnifier Use an achromatic lens with a magnification power value between 2× and 5×. An anti-reflection lens coating is recommended, but not mandatory. 3.1.2 Illuminators Integral or supplementary magnifier illumination may be utilized. Sources shall produce neutral “white light”, temperature-corrected to approximately 3 000 K. Positive ventilation or other illuminator provisions shall prevent deleterious heat transfer to test specimens.

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61300-3-1-2005 PDF

IEC 61300-3-1-2005 PDF

$25.22 $50.44