IEC 61300-3-26-2002 PDF

IEC 61300-3-26-2002 PDF

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-26: Examination and Measurements - Measurement of the Angular Misalignment between Fibre and Ferrules Axes

$50.44 $100.88 -50%
Product Code: IEC 61300-3-26
Stock In Stock
Edition: 2.0
Published: 09/2002
Number of Pages: 38
File Size: 1 file, 967 Bytes

Available Options

Product Description

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-26: Examination and Measurements - Measurement of the Angular Misalignment between Fibre and Ferrules Axes

Scope: This part of IEC 61300 describes the procedure to determine the angular misalignment between the fibre and the ferrule axes in a cylindrical ferrule for singlemode fibre optical connectors with fibre installed. General description This procedure describes the measurement of the angular misalignment between the fibre and the ferrule axes in a cylindrical ferrule for fibre optic connectors with fibre installed. Angular misalignment is defined as the angle δ between the axis of the ferrule and the axis of the installed fibre (see Figure 1). This procedure measures angular misalignment by measuring the deviation in the far field pattern coming from the core as the ferrule is rotated around its axis. Ferrule axis Fibre axis Ferrule Fibre IEC 2142/02 Figure 1 – Definition of the fibre misalignment angle In a optical connector typical values of angular misalignment are in the range of tenths of a degree. At 5 mm from the ferrule surface, the diameter of the light spot (white light) is about 1 mm. On rotating the connector the displacement of the spot is of the order of 1/100 of the spot diameter (45 µm for an angular misalignment of 0,5° at 5 mm from the fibre surface). To detect such a displacement a high precision, automatically controlled set-up is necessary. The deviation of the spot coming from the fibre is also affected by the tilt of the fibre surface with respect to the ferrule axis. This deflection is described by Snell’s law. It is possible to calculate the contribution due to the tilt of the fibre surface from the curvature radius and the apex offset eccentricity. Some notes and explanation about the equations used in this document to correct this effect are given in Annex A. – 10 – 61300-3-26  CEI:2002 Références normatives Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du document de référence s'applique (y compris les éventuels amendements). ISO 2538, Spécification géométrique des produits (GPS) – Séries d'angles et d'inclinaisons de prismes Appareillage L'appareillage utilisé est représenté à

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61300-3-26-2002 PDF

IEC 61300-3-26-2002 PDF

$50.44 $100.88