IEC 61340-4-9 CMV-2024 PDF

IEC 61340-4-9 CMV-2024 PDF

Electrostatics-Part 4-9: Standard test methods for specific applications-Garments-Resistive characterization

$201.76 $403.52 -50%
Product Code: IEC 61340-4-9 CMV
Stock In Stock
Edition: 3.0
Published: 10/2024
Number of Pages: 82
File Size: 1 file, 6.8 MB

Available Options

Product Description

Electrostatics – Part 4-9: Standard test methods for specific applications – Garments – Resistive characterization

Introduction: This part of IEC 61340 provides test methods for evaluating the electrical resistance of garments that contain surface conductive or dissipative components or materials used in the electronics industry for the control of electrostatic discharge. This document defines procedures for measuring electrical resistance, including a system resistance test for garments that provide a ground path for personnel. Clothing made from synthetic fibres is a common source of electrostatic charge. Wearing an appropriate static control garment over personnel clothing can minimize the effect of this charge. To effectively control electrostatic charges of the static control garments and effectively shield the electrostatic field of personnel clothing, the static control garment should be grounded. Three categories of garments are considered in this document. a) A static control garment may can suppress or otherwise affect an electric field from clothing worn underneath the garment without being attached to ground. However, without grounding, a charge may can accumulate on conductive or dissipative elements of a garment, if present, resulting in a charged source. b) A groundable static control garment may can provide a higher level of suppression when the lower resistance fabric is connected to ground. c) A groundable static control garment system provides a ground path for a person that suppresses the electrical field from clothing worn underneath the garment and also bonds the skin of the weare

Scope: This part of IEC 61340 provides test methods for measuring the electrical resistance of garments used for static control applications. These test methods can be used for evaluating outer garments that are homogenously conductive or homogeneously dissipative, or that utilize surface conductive or surface dissipative components or elements. NOTE It is possible that the test methods defined in this document may will not be able to measure materials with buried conductive layers. The resistance point-to-point test method tests the electrical resistance between the two sleeves, any two panels or any two or more electrically interconnected components of the static control garment, including the electrical resistance across the seams and cuffs of the garment as applicable. An alternate sleeve-to-sleeve test method is allowed described, using clamps to hang a garment. Static control garments that electrically bond to the wearer and provide a path to ground from the wearer are evaluated using the resistance point-to-point test method, the resistance point- to-groundable point test method, as well as a system test to determine the resistance from the person through the garment to the groundable point of the garment system. A band resistance measurement test is provided in IEC 61340-4-6 which can be used for garments so equipped with cuffs that are intended to perform the same function as a wrist strap band. The system test with a person wearing a groundable static control garment system includes the ground cord that connects to the groundable point of the garment.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61340-4-9 CMV-2024 PDF

IEC 61340-4-9 CMV-2024 PDF

$201.76 $403.52