IEC 61347-2-1 (REDLINE + STANDARD)-2024 PDF

IEC 61347-2-1 (REDLINE + STANDARD)-2024 PDF

Controlgear for electric light sources-Safety-Part 2-1: Particular requirements-Starting devices (other than glow starters)

$171.50 $342.99 -50%
Product Code: IEC 61347-2-1 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 05/2024
Number of Pages: 82
File Size: 1 file

Available Options

Product Description

Controlgear for electric light sources – Safety – Part 2-1: Particular requirements – Starting devices (other than glow starters)

Introduction: This first edition of IEC 61347-2-1, published in conjunction with IEC 61347-1, represents an editorial review of IEC 60926. The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This standard, and the parts which make up IEC 61347-2, in referring to any of the clauses of IEC 61347-1, specify the extent to which such a clause is applicable and the order in which the tests are to be performed; they also include additional requirements, as necessary. All parts which make up IEC 61347-2 are self-contained and, therefore, do not include references to each other. Where the requirements of any of the clauses of IEC 61347-1 are referred to in this standard by the phrase ”The requirements of clause n of IEC 61347-1 apply”, this phrase is interpreted as meaning that all requirements of the clause in question of part 1 apply, except any which are clearly inapplicable to the specific type of lamp controlgear covered by this particular part of IEC 61347-2. The technical requirements in this document compared to IEC 61347-2-1:2000, IEC 61347-2-1:2000/AMD1:2005 and IEC 61347-2-1:2000/AMD2:2013 are essentially unchanged. Nevertheless, a new edition of this document could not be avoided, as without the introduction of dated references to IEC 61347-1:2015 and IEC 61347-1:2015/AMD1:2017, the fourth edition of IEC 61347-1:—1 would have been implicitly applicable due to

Scope: This part of IEC 61347 specifies safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on AC supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts controlgear covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9. This document does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by IEC 61347-2-8. NOTE 1 Glow starters are dealt with in IEC 60155. NOTE 2 Performance requirements are given in IEC 60927.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61347-2-1 (REDLINE + STANDARD)-2024 PDF

IEC 61347-2-1 (REDLINE + STANDARD)-2024 PDF

$171.50 $342.99