Electronic railway equipment – Train communication network (TCN) – Part 3-4: Ethernet Consist Network (ECN)
Introduction: This part of IEC 61375 series of international standards specifies the Consist Network based on Ethernet technology, i.e. the Ethernet Consist Network (ECN) within the TCN architecture as defined in IEC 61375-1, and End Devices which can attach to the ECN. In addition gateway services between Train Backbone and ECN are specified. The general architecture of the TCN (see IEC 61375-1) defines a hierarchical structure with two levels of networks, Train Backbone(s) and Consist Network(s). This hierarchical structure specifies Consist Networks based on different technologies such as MVB, CANopen and ECN interfacing one Train Backbone. ECNs based on different design and implementation may be interfaced to the same Train Backbone reaching the result that the Train Backbone ensures interoperability between Consist Networks with different implementations. The common part, consisting of Clauses 1 to 4, defines requirements and specifications which are common to all ECN implementations and End Devices and gateways. The common part defines the data communication interface of End Devices connected to the ECN, functions and services provided by the ECN to End Devices, the gateway functions for data transfer between Train Backbone and the ECN, and performances of the ECN.
Scope: This part of IEC 61375 specifies the data communication network inside a Consist based on Ethernet technology, the Ethernet Consist Network (ECN). The applicability of this part of IEC 61375 to the Consist Network allows for interoperability of individual vehicles within Open Trains in international traffic. This part of IEC 61375 may be additionally applicable to closed trains and Multiple Unit Trains when so agreed between purchaser and supplier.
Contents:
- FOREWORD
- INTRODUCTION
- Scope