IEC 61378-3-2015 PDF

IEC 61378-3-2015 PDF

Converter transformers-Part 3: Application guide

$255.36 $510.71 -50%
Product Code: IEC 61378-3
Stock In Stock
Edition: 2.0
Published: 02/2015
Number of Pages: 196
File Size: 1 file, 2 Bytes

Available Options

Product Description

Converter transformers – Part 3: Application guide

Introduction: 0.1 General IEC 61378 series is written in three parts: Part 1 applies to transformers associated with general "Industrial" converter uses. (Copper making, aluminium smelting and the electrolysis of certain gases). Part 2 applies to transformers required for HVDC applications. Part 3 is this application guide which contains the topic headings described in 0.2 to 0.13. The scope of IEC 61378-1 is limited to application of power converters of any power rating. Typical applications are: thyristor rectifiers for electrolysis; diode rectifiers for electrolysis; thyristor rectifiers for large drives; thyristor rectifiers for scrap melting furnaces, and diode rectifiers feeding inverters for variable speed drives. The standard also covers the regulating unit utilized in such application as step down regulating transformers or autotransformers. The valve winding highest voltage for equipment is limited to 36 kV. IEC 61378-2 covers converter transformers used in “HVDC Applications”. There are two types of HVDC power transmission systems known generically as “back to back” and “transmission” schemes. The operation and evaluation of transformers operating within these two systems are covered by Part 2 and the present part of IEC 61378. Neither IEC 61378-1:2011 nor IEC 61378-2:2001, explicitly include in their scope transformers connected to voltage source converters (VSC). Because VSC applications are becoming more and more common, some guidance is provided in this standard. 0.2 Rating

Scope: This part of IEC 61378 provides information to users about specific topics related to industrial and HVDC converter transformers with design, construction, testing and operating conditions differing from conventional transformers used in power systems. In addition, it is the aim of the present part of IEC 61378 to provide manufacturers with the technical background that forms the basis for the principles used within IEC 61378-1 and IEC 61378-2. It is intended that this part of IEC 61378 is used to supplement and not replace or supersede the application guide for power transformers, IEC 60076-8, since many of the general principles contained within it are equally applicable to converter transformers.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61378-3-2015 PDF

IEC 61378-3-2015 PDF

$255.36 $510.71