IEC 61400-3-1-2019 PDF

IEC 61400-3-1-2019 PDF

Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines

$352.50 $705.00 -50%
Product Code: IEC 61400-3-1
Stock In Stock
Edition: 1.0
Published: 04/05/2019
Number of Pages: 309
File Size: 1 file, 6 Bytes

Available Options

Product Description

Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines

Introduction: This part of IEC 61400 outlines the minimum design requirements for fixed offshore wind turbines and is not intended for use as a complete design specification or instruction manual. Several different parties may be responsible for undertaking the various elements of the design, manufacture, assembly, installation, erection, commissioning, operation and maintenance of an offshore wind turbine and for ensuring that the requirements of this document are met. The division of responsibility between these parties is a contractual matter and is outside the scope of this document. Any of the requirements of this document may be altered if it can be suitably demonstrated that the safety of the system is not compromised. Compliance with this document does not relieve any person, organization, or corporation from the responsibility of observing other applicable regulations. The document is not intended to give requirements for floating offshore wind turbines. For floating installations, reference is made to IEC 61400-3-2.

Scope: This part of IEC 61400 specifies additional requirements for assessment of the external conditions at an offshore wind turbine site and specifies essential design requirements to ensure the engineering integrity of fixed offshore wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. This document focuses on the engineering integrity of the structural components of an offshore wind turbine but is also concerned with subsystems such as control and protection mechanisms, internal electrical systems and mechanical systems. A wind turbine shall be considered as a fixed offshore wind turbine if the support structure is subject to hydrodynamic loading and it is founded on the seabed. The design requirements specified in this document are not sufficient to ensure the engineering integrity of floating offshore wind turbines. For floating installations, reference is made to IEC 61400-3-2. In the remainder of this document, the term “offshore wind turbine” is assumed to refer to those that are fixed to the seabed. This document should be used together with the appropriate IEC and ISO standards mentioned in Clause 2. In particular, this document is fully consistent with the requirements of IEC 61400-1. The safety level of the offshore wind turbine designed according to this document shall be at or exceed the level inherent in IEC 61400-1. In some clauses, where a comprehensive statement of requirements aids clarity, replication of text from IEC 61400-1 is included.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61400-3-1-2019 PDF

IEC 61400-3-1-2019 PDF

$352.50 $705.00