IEC 61472-2-2021 PDF

IEC 61472-2-2021 PDF

Live working-Minimum approach distances-Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

$50.44 $100.88 -50%
Product Code: IEC 61472-2
Stock In Stock
Edition: 1.0
Published: 03/2021
Number of Pages: 36
File Size: 2 files, 120 Bytes

Available Options

Product Description

Live working – Minimum approach distances – Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

Scope: This part of IEC 61472 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials. The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail: workers are trained for, and skilled in, working live lines or close to live conductors or equipment; the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage; transient overvoltages are the determining overvoltages; tool insulation has no continuous film of moisture present on the surface; no lightning is observed within 10 km of the work site; allowance is made for the effect of the conducting components of tools. NOTE In some countries, special procedures have been developed to permit live working with surface moisture on tools at distribution voltages (below 50 kV).

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61472-2-2021 PDF

IEC 61472-2-2021 PDF

$50.44 $100.88