Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
Introduction: a) Technical background, main issues and organization of this document This International Standard sets out requirements applicable to instrumentation and control systems and equipment (I&C systems) that are used to perform functions important to safety in nuclear power plants (NPPs). This document highlights the relations between 1) the safety objectives of the NPP and the requirements for the overall architecture of the I&C systems important to safety; 2) the overall architecture of the I&C systems and the requirements of the individual systems important to safety. It is intended that this document be used by designers, operators of NPPs (utilities), systems evaluators and by licensors. b) Situation of the current standard in the structure of the IEC SC 45A standard series IEC 61513 is the first level IEC SC 45A document tackling the issue of general requirements for systems. It is the entry point of the IEC SC 45A standard series regarding I&C systems. For more details on the structure of the IEC SC 45A standard series, see item d) of this introduction. c) Recommendations and limitations regarding the application of this document It is important to note that this document establishes no additional functional requirements for systems important to safety. To ensure that this document will continue to be relevant in future years, the emphasis has been placed on issues of principle, rather than specific technologies. d) Description of the structure of the IEC SC 45A standard s
Scope: 1.1 General I&C systems important to safety may be implemented using hardwired equipment, programmable digital equipment such as processor-based or HDL-programmed devices, or by using a combination of several types of technologies. This document provides requirements and recommendations for the overall I&C which may contain one or several of these technologies. This document highlights also the need for complete and precise requirements, derived from the plant safety goals, as a pre-requisite for generating the comprehensive requirements for the overall I&C, and hence for the individual I&C systems important to safety. This document introduces the concept of a safety lifecycle for the overall I&C including the I&C architecture, and a safety lifecycle for the individual systems. By this, it highlights the relations between the safety objectives of the NPP and the requirements for the architecture of the I&C systems important to safety, and the relations between the I&C architecture and the requirements of the individual systems important to safety. Standards such as ISO/IEC/IEEE 15288 provide an overarching concept of system lifecycle provisions covering product-related processes as well as business development. The scope of IEC 61513 refers to safety aspects and their demonstration, and significantly deepens the considerations of ISO/IEC/IEEE 15288 in this field. The lifecycles illustrated in and followed by this document are not the only ones possible; other lifecycles can be followed, provided that the requirements stated in this document are satisfied. NOTE This document addresses the safety lifecycle of the overall I&C and of the individual systems. Although systems not important to safety are not in the scope of this document, they are considered in the overall I&C safety lifecycle, as they can constitute constraints for the design and qualification of systems important to safety (e.g. installation in common rooms, interfaces, sizing of support systems, coordination of installation and commissioning works). Furthermore, this document does not describe the handling of interfaces between organizations (owner, architect engineering organization, engineering or
Contents:
- FOREWORD
- INTRODUCTION
- Scope