IEC 61534-1-2020 PDF

IEC 61534-1-2020 PDF

Powertrack systems-Part 1: General requirements

$447.66 $895.31 -50%
Product Code: IEC 61534-1
Stock In Stock
Edition: 2.2
Published: 07/2020
Number of Pages: 292
File Size: 1 file, 3 Bytes

Available Options

Product Description

Powertrack systems – Part 1: General requirements

Introduction: Particular requirements for specific types of powertrack systems will be specified in the relevant parts 2 of IEC 61534. For a specific type of powertrack system the requirements of Part 1 of the standard are to be considered, together with the particular requirements of the appropriate Part 2, which will supplement or modify some of the corresponding clauses in Part 1 to provide the complete requirements for that type of system. Part 1 shall apply unless supplemented or modified by an appropriate Part 2.

Scope: 1.1 This part of IEC 61534 specifies general requirements and tests for powertrack (PT) systems with a rated voltage not exceeding 277 V a.c. single phase, or 480 V a.c. two or three phase 50 Hz/ or 60 Hz with a rated current not exceeding 63 A. These systems are used for distributing electricity in household, commercial and industrial premises. 1.2 Powertrack systems, according to this standard, are intended for use under the following conditions: an ambient temperature in the range –5 °C to + 40 °C, the average value over a 24 h period not exceeding 35 °C; a situation not subject to a source of heat likely to raise temperatures above the limits specified above; an altitude not exceeding 2000 m above sea level; an atmosphere not subject to excessive pollution by smoke, chemical fumes, prolonged periods of high humidity or other abnormal conditions. In locations where special conditions prevail, as in ships, vehicles and the like and in hazardous locations, for instance, where explosions are liable to occur, special constructions may be necessary. This standard does not apply to cable trunking systems and cable ducting systems covered by IEC 61084 [8] 1; busbar trunking systems covered by IEC 60439-2 [5]; electrical supply track systems for luminaires covered by IEC 60570 [6].

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Clearances, creepage distances and solid insulation
  • 10.1 General
  • 10.2 Clearances
  • 10.2.1 General
  • 10.2.2 Clearances for basic insulation
  • 10.2.3 Clearances for functional insulation
  • 10.2.4 Clearances for supplementary insulation
  • 10.2.5 Clearances for reinforced insulation
  • 10.3 Creepage distances
  • 10.3.1 General
  • 10.3.2 Creepage distances for basic insulation
  • 10.3.3 Creepage distances for functional insulation
  • 10.3.4 Creepage distances for supplementary insulation
  • 10.3.5 Creepage distances for reinforced insulation
  • 10.4 Solid insulation
  • 11 Protection against electric shock
  • 11.1 Access to live parts
  • 11.2 Provision for earthing
  • 11.3 Effectiveness of protective circuit continuity
  • 12 Terminals and terminations
  • 13 Screws, current carrying parts and connections
  • 14 Mechanical strength
  • 14.1 General
  • 14.2 Impact test
  • 14.3 Static load test
  • 15 Insulation resistance test and dielectric strength test
  • 15.1 General

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61534-1-2020 PDF

IEC 61534-1-2020 PDF

$447.66 $895.31