IEC 61557-1 (REDLINE + STANDARD)-2019 PDF

IEC 61557-1 (REDLINE + STANDARD)-2019 PDF

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements

$171.50 $342.99 -50%
Product Code: IEC 61557-1 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 07/2019
Number of Pages: 86
File Size: 1 file, 1.9 MB

Available Options

Product Description

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements

Introduction: IEC 60364-6:2006, stipulates standardized conditions for the initial test of power installations in TN, TT or IT (IEC 60364) systems for continuous monitoring and for testing these installations after modifications. In addition to general references for the execution performance of the tests, IEC 60364-6 contains requirements that have to be verified by measurements. Only in a few instances, for example when measuring the insulation resistance, the standard contains does IEC 60364-6 contain details of the characteristics of the measuring device to be used. Circuits which are given as examples in IEC 60364-6, and referred to within the text of that document, are generally not suitable for practical use. The tests are carried out in installations where hazardous voltages can occur and where careless use or a defect in the equipment can easily cause an accident. Therefore, the technician has to rely on measuring devices which ensure, apart from simplification of the measurements, safe test methods, in addition to simplifying the measurements. The application of the general safety regulations for electrical and electronic measuring devices (IEC 61010-1) for testing the protective measures is not sufficient in itself. The execution performance of measurements in the installation can cause hazards not only to the technician, but also to third persons, depending on the measuring method, also to third persons used. Likewise, reliable and comparable results of measurement with measuri

Scope: This part of IEC 61557 specifies the general requirements for applicable to measuring and monitoring equipment for testing the electrical safety in low-voltage distribution systems with nominal voltages up to 1 000 V AC and 1 500 V DC. When measuring equipment or measuring installations involve measurement tasks of various measuring equipment covered by this series of standards, then the part of this series relevant to each of the measurement tasks is applicable. NOTE The term "measuring equipment" will hereafter be used to designate "testing, measuring and monitoring equipment". Other parts of IEC 61557 can specify additional requirements or deviations. This document does not cover functional safety or cybersecurity.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61557-1 (REDLINE + STANDARD)-2019 PDF

IEC 61557-1 (REDLINE + STANDARD)-2019 PDF

$171.50 $342.99