IEC 61580-1-1996 PDF

IEC 61580-1-1996 PDF

Methods of Measurement for Waveguides - Part 1: Decoupling and Rotation of the Plane of Polarization

$25.22 $50.44 -50%
Product Code: IEC 61580-1
Stock In Stock
Edition: 1.0
Published: 06/1996
Number of Pages: 22
File Size: 1 file, 767 Bytes

Available Options

Product Description

Methods of Measurement for Waveguides - Part 1: Decoupling and Rotation of the Plane of Polarization

Scope: This part of IEC 1580 is applicable to waveguides which can propagate two orthogonal polarizations of the same waveguide mode. In this way, the waveguide type is generally restricted to square or circular cross-section, such as waveguide with an octagonal cross- section. The objective of the three test procedures given below is to characterize the cross-polar properties of waveguides. When a single mode of defined polarization is generated at the source end of the waveguide under test, geometrical imperfections will induce a depolarization to occur as the signal propagates along the waveguide. This depolarization will be a limiting factor on the usefulness of the waveguide in supporting two independent polarizations. As a result, it is necessary to quantify the generated cross-polarization in the waveguide under test. The measurement procedures attempt to do just that. Testing can be performed on waveguide runs or on a single waveguide. Tests may be performed in the field not just in the laboratory. Three procedures are briefly described, which include the following: a) Measurement procedure for the decoupling, defined as the orthogonally polarized signal level reflected from the waveguide under test when terminated with a matched load. b) Measurement procedure for the generated cross-polarized level when a single polarization signal is injected into a waveguide under test. c) Measurement procedure for establishing the effective angle of rotation of the electric field in the waveguide under test.

Contents:

  • FOREWORD
  • 1 Scope
  • 2 Measurement of decoupling
  • 2.1 Principle
  • 2.2 Test equipment
  • 2.3 Procedure
  • 2.4 Expression of results
  • 3 Measurement of cross-polarization
  • 3.1 Principle
  • 3.2 Test equipment
  • 3.3 Procedure
  • 3.4 Expression of results
  • 4 Measurement of the plane of polarization
  • 4.1 Principle
  • 4.2 Test equipment
  • 4.3 Procedure
  • 4.4 Expression of results
  • 2 Test set-up for measuring waveguide cross-polarization

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61580-1-1996 PDF

IEC 61580-1-1996 PDF

$25.22 $50.44