IEC 61643-12-2020 PDF

IEC 61643-12-2020 PDF

Low-voltage surge protective devices-Part 12: Surge protective devices connected to low-voltage power systems-Selection and application principles

$299.49 $598.97 -50%
Product Code: IEC 61643-12
Stock In Stock
Edition: 3.0
Published: 05/2020
Number of Pages: 438
File Size: 1 file, 10 Bytes

Available Options

Product Description

Low-voltage surge protective devices – Part 12: Surge protective devices connected to low-voltage power systems – Selection and application principles

Introduction: 0.1 General Surge protective devices (SPDs) are used to protect, under specified conditions, electrical systems and equipment against various overvoltages and impulse currents, such as lightning and switching surges. SPDs shall be selected according to their environmental conditions and the acceptable failure rate of the equipment and the SPDs. This document provides information to the user about characteristics useful for the selection of an SPD. This document provides information to evaluate the need for using SPDs in low-voltage systems, with reference to IEC 62305, Parts 1 to 4 and the IEC 60364 series. It also provides information on selection and coordination of SPDs, while taking into account the entire environment in which they are applied. Examples include: equipment to be protected and system characteristics, insulation levels, overvoltages, method of installation, location of SPDs, coordination of SPDs, end of life behaviour of SPDs and equipment failure consequences. IEC 62305-2 provides a general method for evaluating the risk due to surges and lightning. IEC 60364-4-44 provides a simplified way of evaluating the risk posed to electrical installations. Guidance on requirements for product insulation coordination is provided by IEC 60664 series. Requirements for safety (fire, overcurrent and electric shock) and installation are provided by IEC 60364 series. The IEC 60364 series provide direct information for contractors on the installation of SPDs. IEC TR 62066 co

Scope: This part of IEC 61643 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. NOTE 1 Additional requirements for special applications are also applicable, If required. NOTE 2 IEC 60364 and IEC 62305-4 are also applicable. NOTE 3 This document deal only with SPDs and not with surge protection components (SPC) integrated inside equipment.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61643-12-2020 PDF

IEC 61643-12-2020 PDF

$299.49 $598.97