Electroacoustics – Measurement of real-ear acoustical performance characteristics of hearing aids
Introduction: The performance characteristics of hearing aids in actual use can differ significantly from those determined in accordance with standards such as IEC 60118-0, and IEC 60118-7, due to differing acoustic influence and coupling presented by individual ears. Measuring methods that take into account the acoustic coupling and the acoustic influence of the individual wearer on the performance of hearing aids are therefore important in the fitting of these devices. Such measuring methods have come to be known as “real-ear measurements” and are sometimes performed clinically in less than ideal acoustic environments. The accuracy and repeatability of measurements made under such conditions are complex functions of the sound field, the test environment, the nature of the test signal, the hearing aid under evaluation, the method of test signal control, the location of the sound field source, the nature of the data acquisition, analysis and presentation as well as the degree of subject movement permitted. This standard provides definitions for terms used in the measurement of real-ear performance characteristics of hearing aids, provides procedural and reporting guidelines, and identifies essential characteristics to be reported by the manufacturer of equipment used for this purpose. Acceptable tolerances for the control and measurement of sound pressure levels are indicated. Where possible, sources of error have been identified and suggestions provided for their management.
Scope: This International Standard gives recommendations and requirements for the measurement and estimation of the real-ear acoustical performance characteristics of air-conduction hearing aids and for the measurement of certain acoustic properties of the ear related to the application of hearing aids. Measurements of real-ear acoustical characteristics of hearing aids which apply non-linear or analytical processing techniques are valid only for the test signals used and conditions employed. The purpose of this standard is to ensure that measurements of real-ear acoustical performance characteristics of a given hearing aid on a given human ear can be replicated in other locations with other test equipment.
Contents:
- FOREWORD
- INTRODUCTION
- Scope