IEC 61672-3-2013 PDF

IEC 61672-3-2013 PDF

Electroacoustics-Sound level meters-Part 3: Periodic tests

$72.51 $145.02 -50%
Product Code: IEC 61672-3
Stock In Stock
Edition: 2.0
Published: 09/2013
Number of Pages: 42
File Size: 1 file, 332 Bytes

Available Options

Product Description

Electroacoustics – Sound level meters – Part 3: Periodic tests

Scope: This second edition of IEC 61672-3 describes procedures for periodic testing of time-weighting, integrating-averaging, and integrating sound level meters that were designed to conform to the class 1 or class 2 specifications of the second edition of IEC 61672-1. The aim of the standard is to ensure that periodic testing is performed in a consistent manner by all laboratories. NOTE 1 In this document, references to IEC 61672-1, IEC 61672-2, and IEC 61672-3 refer to the second editions unless stated otherwise. NOTE 2 Procedures for the periodic testing of sound level meters designed to conform to the specifications of IEC 61672-1:2002 were given in IEC 61672-3:2006. The purpose of periodic testing is to assure the user that the performance of a sound level meter conforms to the applicable specifications of IEC 61672-1 for a limited set of key tests and for the environmental conditions under which the tests were performed. The extent of the tests in this part of IEC 61672 is deliberately restricted to the minimum considered necessary for periodic tests. Periodic tests described in this edition of IEC 61672-3 apply to sound level meters for which the manufacturer claims conformance to the specifications of the second edition of IEC 61672-1. Periodic tests described in this part of IEC 61672 apply to sound level meters for which the model has been, or has not been, pattern approved by an independent testing organization responsible for pattern approvals in accordance with the test procedures of the second edition of IEC 61672-2. Because of the limited extent of the periodic tests, if evidence of pattern approval is not publicly available, no general conclusion about conformance to the specifications of IEC 61672-1 can be made, even if the results of the periodic tests conform to all applicable requirements of this edition of IEC 61672-3.

Contents:

  • FOREWORD
  • Scope
  • 10 Indication at the calibration check frequency
  • 11 Self-generated noise
  • 11.1 Microphone installed
  • 11.2 Microphone replaced by the electrical input-signal device
  • 12 Acoustical signal tests of a frequency weighting
  • 13 Electrical signal tests of frequency weightings
  • 14 Frequency and time weightings at 1 kHz
  • 15 Long-term stability
  • 16 Level linearity on the reference level range
  • 17 Level linearity including the level range control
  • 18 Toneburst response
  • 19 C-weighted peak sound level
  • 20 Overload indication
  • 21 High-level stability
  • 22 Documentation

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61672-3-2013 PDF

IEC 61672-3-2013 PDF

$72.51 $145.02