IEC 61709 (REDLINE + STANDARD)-2017 PDF

IEC 61709 (REDLINE + STANDARD)-2017 PDF

Electric components-Reliability-Reference conditions for failure rates and stress models for conversion

$460.90 $921.79 -50%
Product Code: IEC 61709 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 02/2017
Number of Pages: 378
File Size: 1 file, 5.9 MB

Available Options

Product Description

Electric components – Reliability – Reference conditions for failure rates and stress models for conversion

Introduction: This document is intended for the reliability prediction of electric components as used in equipment and is aimed at organizations that have their own data and describes how to state and use that data in order to perform reliability predictions. It can also be used to allow an organization to set up a failure rate database and describes the reference conditions for which field failure rates should be stated. The reference conditions adopted in this document are typical of the majority of applications of components in equipment however when components operate under other conditions the users may consider stating these conditions as their reference conditions. Using the presented stress models allows extrapolation of failure rates from reference conditions to other operating conditions which in turn permits the prediction of failure rates at assembly level. This allows estimation of the effect of design changes or changes in the environmental conditions on component reliability. Reliability prediction is most useful in the early design phase of electrical equipment. It can be used, for example, to identify potential reliability problems, the planning of logistic support strategies and the evaluation of designs. The stress models contained herein are generic and are as simple as possible while still being comparable with more complex equations contained in other models. The predictions generated using this document have a wide range of prediction accuracy. This document does not

Scope: This document gives guidance on how the use of failure rate data can be employed for reliability prediction of electric components used in equipment. The method presented in this document uses the concept of reference conditions which are numerical the typical values of stresses that are observed by components in the majority of applications. Reference conditions are useful since they are the basis of the calculation of failure rate under any conditions by the application of stress models that take into account the actual operating provide a known standard basis from which failure rates can be modified to account for differences in environment from the environments taken as reference conditions. Each user can use the reference conditions defined in this document or use their own. When failure rates stated at reference conditions are used it allows realistic reliability predictions to be made in the early design phase. The stress models described herein are generic and can be used as a basis for conversion of failure rate data given at these reference conditions to actual operating conditions when needed and this simplifies the prediction approach. Conversion of failure rate data is only permissible possible within the specified functional limits of the components. This document also gives guidance on how a database of component failure data can be constructed to provide failure rates that can be used with the included stress models. Reference conditions for failure rate data are specified, so that data from different sources can be compared on a uniform basis. If failure rate data are given in accordance with this document then no additional information on the specified conditions is required can be dispensed with. This document does not provide base failure rates for components – rather it provides models that allow failure rates obtained by other means to be converted from one operating condition to another operating condition. The prediction methodology described in this document assumes that the parts are being used within its useful life. The methods in this document have a general application but are specifically applied to a selection of component types a

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61709 (REDLINE + STANDARD)-2017 PDF

IEC 61709 (REDLINE + STANDARD)-2017 PDF

$460.90 $921.79