Photovoltaic system performance - Part 1: Monitoring
Introduction: This International Standard defines classes of photovoltaic (PV) performance monitoring systems and serves as guidance for various monitoring system choices. Figure 1 illustrates possible major elements comprising different PV system types. The PV array may include both fixed axis and tracking systems and both flat plate and concentrator systems. Module-level electronics, if present, may be a component of the monitoring system. For simplicity, the main clauses of this document are written for grid-connected systems without local loads, energy storage, or auxiliary sources, as shown by the bold lines in Figure 1. Annex D includes details for systems with additional components. Key RNE renewable energy PCE power conditioning equipment BDI bi-directional inverter GCI grid-connected inverter Bold lines denote simple grid-connected system without local loads, energy storage, or auxiliary sources. Figure 1 – Possible elements of PV systems The purposes of a performance monitoring system are diverse and can include the following: Back up source(s) on AC Other RNE source(s) on AC Load(s) on AC Utility grid line IBUac, VBUac PBUac AC PREac PLac ILac, VLac ITL,dcc, PTL,dcc ITB,ac, PTB,ac ITG, PTG IFG, PFG VG VPac IFPac, PFPac ITPac, PTPac IAac,ac, VAac,ac PAac,ac PCE-GCI PCE-BDI ITP, PTP VPdc IFP, PFP PAdc,ac IAdc,ac, VAdc,ac ILdc, PLdc IBUdc, VBUdc PBUdc PREdc VS, IFS, PFS ITS, PTS PAdc,dc IAdc,dc, VAdc dc Load(s) on DC Back up source(s) on DC Other RNE source(s) on DC Energy storage
Scope: This part of IEC 61724 outlines equipment, methods, and terminology for performance monitoring and analysis of photovoltaic (PV) systems. It addresses sensors, installation, and accuracy for monitoring equipment in addition to measured parameter data acquisition and quality checks, calculated parameters, and performance metrics. In addition, it serves as a basis for other standards which rely upon the data collected.
Contents:
- FOREWORD
- INTRODUCTION
- Scope